removing rear fender off my 800

Started by Indian Drifter, June 14, 2011, 22:52:29 PM

Previous topic - Next topic

Indy

Not in 5 min, just do it carefully..

Indy


KEN.

Hello All........I just had my rear fender off...only takes a few minutes....It'll be faster next time as I notch cut the bracket behind the muffler, so now i just
have to undo the bolt a little instead of removing it... Works for me....KEN.


TripWire

I would recommend shortening the bold by the exhaust once you get it out.  Mad my life a lot easier.


vf24renegade

5 minutes is a good estimate until you come to the long lower bolt that's difficult to get out because the exhaust is in the way. Then it takes considerably longer.


chief

Slainte mhaith - Good Health - Cheers

'02 Vulcan Drifter 1500

jamman

The main wire from the fender goes into a box under the seat ... pull the connector out of the box and disconnect

Remove the six bolts on the fender and take off ..

Can be done in 5 mins without removing the seat .. 


chief

Don't know, but I suspect there are some... maybe in the light buckets themselves or under the seat??? Don't have an 800!

Slainte mhaith - Good Health - Cheers

'02 Vulcan Drifter 1500

Indian Drifter

OK I'm removing the rear fender... Are there any electrical plugs to disconnect  in order to remove the lighting?? Or do I have to cut wires??


SMF spam blocked by CleanTalk