Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - toad 5.0

#1
Drifter 1500 only / Bobber anyone?
November 24, 2024, 14:51:19 PM

I know the forum doesnt have much traffic anymore but figured id post this question here anyway ...

Anyone done or know of anyone who has done a Bobber conversion on a 1500 drift? Before anyone is triggered with this "blashphemy".. I know of a drifter thats had its fenders (and some other bits) sold off for parts. Still runs and need a bunch of work but got thinking.. Bobber??

anyone? Bueller?

#2

Not sure where to post this so here seems as good as any...

recently obtained a set of Osprey luggage mounts and "thought" the would be a no-brainer to attach to the bike... however.. I must be doing something wrong and hoping someone here has some experience/insight into wth is up here..(see pic)

If its not obvious the mount is not level with the ground. Am I missing something? Is it for some very unknown reason supposed to be on a angle???

Thanks in advance for any helpful.. help

#4

Got the Emgo Beach Bars installed and all is well.

Bars are knurled and fit in the risers perfectly. I had to drill a small hole to mount the right side controls and reroute the cables. The front brake line is at its limit and im a bit OCD so I ordered a short line extender (not yet installed).

I didnt take any pics prior to but here are a couple I took today.

IMG_0468.jpg   IMG_0472.jpg

Took a few minutes into the first ride with the bars to adjust to them, but changing over set me back in the seat just enough and gives me a more comfortable riding position for sure.

#5
Quote from: Bucko on May 25, 2024, 03:48:29 AM

Riding position depends on the beach bars.  I've got a set (I think -38"), of beach bars on my 01 that are really comfortable, with just the exact right amount of pullback for me - sadly I can't remember the make.  I've got a set of 38" Flanders beach bars on my 99, and although I think they look great, and I have got used to them, the riding position is quite a bit forward compared to the set I have on the 01.  The bars on the 01 required some slight cable rerouting but the ones on the 99 didn't require any rerouting.

I tried a set of generic risers, no go for me. Easy return though (amazon).

I'm gonna give these a try. Compared to the stock bars dims, they should have just enough pull back for me. Once I have them I'll update.

#6

At 68" (172cm) im finding that the OEM bars have me sitting a bit farther forward than i would like.

Reading thru posts from years gone by it seems one answer was using risers (Phat II specifically) to bring the bars back a bit. With the maker of these risers long gone, Im wondering if anyone has found and/or is using aftermarket Beach Bars to bring them a bit closer to the rider? Or possibly any other risers that are on the market that will do the same thing?

thanks in advance

#7
Quote from: 53Indian on May 08, 2024, 03:37:02 AM

Pictures below

very nice!

have you tried attaching anything to the rack? i.e. a small bag?

#8

So nearly 20 years now since the Drifter 1500 went the way of the Buffalo (stopped production) and some of us (namely me) are still sorting what works and doesn't with the bike... i.e tires, seats, exhausts, lights and other mods..

This time I am trying to sort out if there is a way to mount a USEFUL rear fender rack that wont interfere with the suspension/fender/seat (solo)... Ive found several post from years gone by of people mounting "sportster style" racks, but any and all pics seem to be gone. Not too mention any real discussion of if they are actually useable?? meaning can I attach a small bag to one and it wont get tossed off (giggity) along the way?

Anyone still out here that has a useful rear fender rack with the solo seat? I cant stand the way the OEM rack looks and hoping there are other options.. and that someone might care to chime in with their experiences... GOOD AND BAD

For short trips, saddlebags are overkill for me but this rack looks nice.. doubtfull anyone is using one, but nice in either case... anyone?? rear fender rack?? anyone?? bueller???

thanks to "anyone"  ;D

#9
General Discussion / Solo Seat Grab Rail?
December 03, 2023, 12:49:44 PM

Ive seen a few pics of Drifters with what appears to be a Solo Seat grab rail from a Hardley. Did a bit of searching and cant come up with any info on it. Does anyone know if the Hardley seat rail works on the Drifter or is there a grab rail on the market to fit the Drifter seat?

#10

Answered my own question.. just kept tweaking the controls and bars and mostly got things back in the proper position...

buying used bikes is always fun... never really know what has or hasnt been done.

the show goes on...

Because im a bit mental I notice things that many (or at least most) do not.

backstory - i recently bought a 1500 drifter and I am going thru it top to bottom and in the process making it "my own".

I noticed the other day that the fluid reservoir (clutch and brake) sit at a rather odd angle, as in not upright. Meaning that if I were to open one up, the fluid will not be level and if full, it will spill out... so I had the notion that perhaps the handlebar position had been moved by the PO. So I rotated the bars to "flatten" (as in make horizontal with the ground) the fluid reservoirs. That worked until I realized the mirrors were way out of whack and in order to make them useful as mirrors, the bars couldnt been titled back as far... so now im wondering if the PO hasnt swapped out the bars at some point and thats throwing things off?

Here is a link to a pic of what they look like when the bars are positioned so the mirrors can be used (I cant figure out how to post my own pic.. so link.

https://drive.google.com/file/d/11os1QZfRFDJYMTEju6XSjeDSARbEKBub/view?usp=sharing

I know this makes me a bit wierd to be fixating on such a thing... BUT I CANT HELP IT!!!  :o

Best I can tell from looking at pics on the web.. such as this one... they "appear" to be mostly level.. unlike mone

ok... so if anyone is here and got this far.... any thoughts?? besides the fact that I am perhaps a bit nuts

#11

Im having a crisis determining which tires to use on my new to me 1500. Im set on using a vintage style tire as I wont be doing any touring or long distance riding on the bike. I have Avons on a Thruxton and understand the sketchy feel on grooved pavement, so.. basically yes I understand they dont perform like more modern tires. All that out of the way...

Anyone running vintage style tires? if so, what? Got any pics?

thanks
-Brian

#12
General Discussion / Shinko 240 Classics Anyone?
November 14, 2023, 13:06:11 PM

Im a Drifter newbe, so please be patient if all of these questions have been asked and answered...

I did a bit of searching and couldn't come up with anything, so thought i'd ask...

Is anyone running Shinko 240 Classics on their 1500?

If so, can you please post a few pics or direct me to some?

They are the same tire front/rear, so thats throwing me a bit, but it might be what im looking for.

It's likely everyone here is quite familar with the following pic.. Anyone know what tires are on this bike?

Thanks in advance for any helpful info

-Brian

#13
Introductions / New to me Drifter 1500 has arrived
November 13, 2023, 19:03:49 PM

Greetings all, I very recently picked up an 03' 1500. Haven't had a chance to put any real time in the saddle (just short runs), but so far im really digging the bike. Ive been a long time rider of Triumphs, and a few UJM's over the years. Closet thing Ive ever owned to a "Cruiser" is an 883R Harley (which I actually liked quite a bit).

Like I suspect most here, I like to go through my bikes and really get to know them as much as possible. Along with changing out the fluids, making sure important bolts are tight, etc.. So far ive determined that I need a front tire (I'll likely replace them both), my windscreen has seen better days and I need something to carry small items in. Im not a huge fan of saddlebags and really dont need that kind of space.

Lastly, if I am gonna keep her (which I likely am) I need to make some changes... i.e paint color, etc. If anyone wants to swap out all there Black "bits" for my "Chrome "bits"... im need to find an appropriate place to post that question..

Well thats my story so far

SMF spam blocked by CleanTalk