Just installed one of Ted Struble's shifters with an Indian Drifter shift knob on top. ;)
Lookin' good RockinRonnie, nice touch! 8)
Very nice!
Very nice
Nice indeed!
It makes me think about doin' it to ma-deuce...
What a classic touch. Better get one while you can at some point Ted won't be making those anymore then those hand shifters will be as hard to find as solo seat rails.
yup that's awesome!
Good clear picture..nice shifter/handle man..gettin' that bike lookin' good. Bike show winner.
That looks so "right" on your bike man!
That's a good look, Ronnie. I looked at those shifter handles too. Looks really good on your bike.
I was told that the Drifter insignia is supposed to face the rider, the palm goes on the flat so I turned it. ???
I was thinking about ordering one some time ago but I didn't want it to block the Zambini Indian tank emblem.
Your pics clearly show it won't ... I just might reconsider!
Thanks for this thread!
It depends on where the bracket on the foot shifter ends up. I purposely moved it forward.
Here's some pix of the bracket that came with the kit and my modification.
Other than that it is fine.
Super sharp. Ted shifter's are iconic. The Drifter itself is #1 for style and retro design and my #2 is Ted's shifter's, old school looks and way way cool factor on the bike, my #3 is the 1500 solo seat rail and #4 1500 cargo rack. IMO if you own a Drifter your bike is not at the next level without the hand shifter. Just driving makes it more fun.
Those shifter Drifter knobs are perfect and high quality. There's a a real cool silver Indian head, that you can get on Ebay from time to time and are cool to change up now and then. It's all metal and can use a basic tap and die set to make the same thread size needed in two minutes. That and 100 more knobs to suite your taste.
Here's mine
beer taps make cool handles to
Quote from: CDNRatMan on May 23, 2016, 08:34:37 AM
beer taps make cool handles to
Real nice but can it poor beer to ;D Lol
>:( and what do you think is in the travel trunk? A good 5 gallons of barley sandwiches......
Be careful consuming those barley sandwiches while your riding. The O.P.P. may see that tap handle and pull you over. ;)
Great idea for the padlocks on your trunk to keep the curious kids from "looking"
Looks perfect! 8)
A tap handle, that would have been cool! A tap handle from Old Flame Brewery in Port Perry would look awesome.
got to think outside the box Uncle Ronny........wait till you see the one being worked on right now....lol......
Now that's thinking inside the keg. ;D
To Trall, nice job on customizing that bike. Really like the air breather cover. Is it the original painted? There's just so many ways to customize a drifter. I would say they are one of the coolest bikes on the road!
Quote from: RockinRonny on May 24, 2016, 20:32:06 PM
To Trall, nice job on customizing that bike. Really like the air breather cover. Is it the original painted? There's just so many ways to customize a drifter. I would say they are one of the coolest bikes on the road!
THX, It was powder coated but the business said because they are made with two pieces of metal glued together it was a pain to get it right and had to re-do it after the first time and glue leaking out of it. They then put it in an acid bath, then bake it for awhile to try and get all the glue residue out and then was able to powder coat paint it. Partzilla.com still has the OEM chrome available and I bought one to change the look at times. Also Iam going to have the maroon cover redone to a matching white and found a couple pieces to change out the center emblem with again for variety.
Here a few more covers I working on to have a variety to change to.
The second pic is of an really cool Indian Head warrior which might be the coolest one. Will see. It looks cool as it is or might go the Gold color for some more pop against the chrome parts of bike.
The third pic is a cool looking metal Indian head coin. It need repainted, so Iam going to have this powder coated gold to accent the gold pin stripping on the bike.
The first pic you see is at the engraver now and not sure how it will turn out. It's a Indian Derby Cover and the engraver is adding Tribute above the Center Indian name and adding Drifter below the Indian name. This is more of the Indianized by using Indian o the bike.
All of these I recently acquired and still working on finishing details for they can be mounted at times.
Here's 2 and 3 pics
Wow, are they (the air breather covers) all the same? I was wondering what kind of metal they were made of, I would love to powder coat mine white but the powder coating process involves an oven baking that probably caused the glue to run out. Good to know.
Quote from: RockinRonny on May 25, 2016, 16:40:47 PM
Wow, are they (the air breather covers) all the same? I was wondering what kind of metal they were made of, I would love to powder coat mine white but the powder coating process involves an oven baking that probably caused the glue to run out. Good to know.
Just search Ebay for Indian Art and various items come up now and then, just find sizes that will fit onto the air filter cover. The one on the bike now was a large belt buckle, grind off the buckle metal not needed on the backside and place and find and drill out two bolt holes that will fit right on the piece and on the air filter. Use two bolts, two lock washers, two acorn nuts to mount as studs on the air cleaner and add a few thin felt furniture pads as needed, to the backside of emblem if needed and mount with the two acorn nuts.......
Quote from: Trall on May 25, 2016, 15:02:32 PM
The first pic you see is at the engraver now and not sure how it will turn out. It's a Indian Derby Cover and the engraver is adding Tribute above the Center Indian name and adding Drifter below the Indian name. This is more of the Indianized by using Indian o the bike.
All of these I recently acquired and still working on finishing details for they can be mounted at times.
very cool idea...love it!
Quote from: tj on May 25, 2016, 20:32:13 PM
very cool idea...love it!
The engraver got it done. It turned out pretty good and the letter is similar to the Indian name. Wished it was slightly bigger letters but that was the largest font that would fit the space and the engraver's machine. The next font was too big for the space.
I used 1/4 " fuel line hose on the inside to cover up the bolts to give it a finished look from the spacing.
Overall it looks great on my Drifter and paying tribute to Indian.
More pic
Quote from: Trall on May 31, 2016, 13:11:52 PM
The engraver got it done. It turned out pretty good and the letter is similar to the Indian name. Wished it was slightly bigger letters but that was the largest font that would fit the space and the engraver's machine. The next font was too big for the space.
I used 1/4 " fuel line hose on the inside to cover up the bolts to give it a finished look from the spacing.
Overall it looks great on my Drifter and paying tribute to Indian.
I think it's the perfect size...looks awesome!
That looks fantastic!
That looks cool. Never thought of an engraver to make up a plate. That is what you did?
That's really interesting... but I wonder if it bothers your leg because of its overall width...
Quote from: RockinRonny on June 01, 2016, 10:36:24 AM
That looks cool. Never thought of an engraver to make up a plate. That is what you did?
Here's the steps- Buy Indian Derby Cover found one on Ebay for $50 with free shipping, The Trophy Plaque Business engraver only did the words "Tribute" and "Drifter" for $15 cost. The Cover itself is called a Indian Derby Cover (Primary cover) from/for some Indian Motorcycles. I just retrofitted it to mount to my 800 air cleaner. I placed the Derby cover on the inside portion of my air cleaner cover, centered it, marked three holes, drilled out holes to 1/4", bought 1" length x 1/4" size chrome machine bolts with allen head tip, placed two furniture felt pads on front on air cover to keep near center bolt stem for air cleaner (to keep from metal and metal contact) screwed on three bolts onto the three nuts on inside of air cleaner, then used JB Weld epoxy and a small tip screwdriver and applied epoxy around all sides of the three nuts (don't have a welder), let set overnight and now can remove derby cover when needed to access air cleaner cover.
Place on air cover to bike and replaced acorn nut with standard nut for tighter clearance for Derby cover, center air cover with the tree holes that align to derby cover, tighten air cleaner cover, put on derby cover, make sure it's centered for lettering, add the three bolts with added 3 cut pieces of 1/2" length fuel line to the inside space of derby and air cleaner covers (just to cover bolts and look finished) and tighten to complete.
Overall fits my 800 well and looks great on the bike while paying homage to Indian.
Quote from: mittico68 on June 01, 2016, 10:41:22 AM
That's really interesting... but I wonder if it bothers your leg because of its overall width...
No problem there. The derby cover is only about 1/4" thick so that's all your adding. The derby cover is sitting directly on top of flat centered area air cleaner with two felt pads added to keep from metal to metal contact in case there was any vibration from riding. The outer three derby cover bolt area with fuel line used as spacer bolt covers is from the contour/bevel of air cleaner. So overall your only adding 1/4" thickness. No issues with legs at all.
P.S. I also have a painted 2nd air cleaner cover that I can change out for variety that has two bolt studs I added to air cleaner cover for small related medallions or smaller badges for variety as well. I am working on some of those now. Look back in this thread for those.
Okay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...
Quote from: mittico68 on June 02, 2016, 12:08:38 PM
Okay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...
The war bonnet tank I bought from link below and I had local autobody shop apply and clear coat. Mine are gold leaf and they also have silver leaf sets. I really like the multi-color of the decals in the sun. They tie in all the colors on my bike from the red, gold, black and white colors.
You can also get them with or without Drifter name.
http://winnerscyclegraphics.com/DrifterIndian.html
Thanx bud!
Where can you purchase the hand shifter kit?
Quote from: Mike O on August 10, 2016, 22:23:07 PM
Where can you purchase the hand shifter kit?
Here's the link: http://www.vulcandrifterriders.com/Teddrifter-hand-shifter.html
Yep, that's the place Ted's Designs
I have Ted's shifter on my bike. Love it! 8) It definitely gets a lot of looks and has people asking a lot of questions.
I really like the looks of the hand shifter and the looks you get when you actually use it are so funny......
Quote from: CDNRatMan on August 11, 2016, 13:01:12 PM
I really like the looks of the hand shifter and the looks you get when you actually use it are so funny......
I came to an intersection near a bar and stopped at the light. When I started back up and used the hand shifter, a guy standing on a balcony above the bar was so mesmerized, he almost went over the railing. ;D
add me to the list of hand jockeys! lol
...just installed, damn cool.