Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by TripWire
 - April 08, 2014, 21:07:57 PM

I used the support that came with the bags.  I think I would need to add a 1/4" spacer if I used the Fire and Steel supports to prevent the bags from rubbing on the fender support.

Posted by Bucko
 - April 08, 2014, 11:57:01 AM

Thanks for posting more pictures TW.

Did those metal supports (the ones you relocated) come with the bags?   Did you take a look at using the Fire & Steel Supports?

Posted by TripWire
 - April 05, 2014, 22:18:29 PM

As soon as the fender trim is done.

Posted by CDNRatMan
 - April 05, 2014, 21:40:43 PM

   boy now a few pictures of the whole set up and we will be content.....thanks....

Posted by TripWire
 - April 05, 2014, 20:49:38 PM

A few more pics of the shock cut out.

Posted by pcarrell
 - March 31, 2014, 21:56:37 PM
Quote from: TripWire on March 31, 2014, 21:23:47 PM

Yes they do have shock cutouts.  Only have about 40 miles on the bike with the new bags but so far no issues and no rubbing.  Hopefully the weather will be decent this weekend and I can get some better pics and then I will get them posted.

You'd better!  ;)
Posted by TripWire
 - March 31, 2014, 21:23:47 PM

Yes they do have shock cutouts.  Only have about 40 miles on the bike with the new bags but so far no issues and no rubbing.  Hopefully the weather will be decent this weekend and I can get some better pics and then I will get them posted.

Posted by Bucko
 - March 31, 2014, 16:48:23 PM
Quote from: TripWire on March 27, 2014, 20:34:48 PM

Order a set of the Viking bags (VLC900S) on Monday and they arrived on my doorstep Wednesday.  I order the set for the Classic, yeah the holes didn't line up so I threw a little shoe-goo in the original holes (those holes will never leak) and started over.  Did some measuring and test fitting with some help from the wifey and ended up drilling a new hole 1 1/4 higher than the original front hole.  Measured back for the rear hole and then down for the lower holes.  I could have probably mounted them a little bit lower but my last set of bags got a little two close to the pipes and yadda , yadda, yadda new bags for this season.

Here are a couple of pics - yeah my bike is a mess.  We purchased a new home the end of October and the bike has been out in the garage getting covered with saw dust during all my projects.  I will get some outdoor pics with better lighting posted when mother nature cooperates.

Hi Trip:

Do those bags have the shock cutouts or not ? (hard to tell from your photos).

Posted by Drift1
 - March 29, 2014, 13:46:47 PM

Tipwire , those bags look pretty dam good . I like the way the shape of the bag follows the fender .

Posted by CDNRatMan
 - March 27, 2014, 22:00:27 PM

 that is why I park in the living room over the winter, so the bike stays clean....just saying.......

nice job by the way........

Posted by TripWire
 - March 27, 2014, 20:34:48 PM

Order a set of the Viking bags (VLC900S) on Monday and they arrived on my doorstep Wednesday.  I order the set for the Classic, yeah the holes didn't line up so I threw a little shoe-goo in the original holes (those holes will never leak) and started over.  Did some measuring and test fitting with some help from the wifey and ended up drilling a new hole 1 1/4 higher than the original front hole.  Measured back for the rear hole and then down for the lower holes.  I could have probably mounted them a little bit lower but my last set of bags got a little two close to the pipes and yadda , yadda, yadda new bags for this season.

Here are a couple of pics - yeah my bike is a mess.  We purchased a new home the end of October and the bike has been out in the garage getting covered with saw dust during all my projects.  I will get some outdoor pics with better lighting posted when mother nature cooperates.



Posted by Bucko
 - March 12, 2014, 17:37:25 PM

Those Viking bags look pretty nice and price seems pretty reasonable. I don't think you'd need the shock cutout with the factory bag supports and bag frames.  Can't remember for sure since It's been so long since I had the supports on.

Posted by capnconch
 - March 12, 2014, 15:24:29 PM

I don think they will work on the Drifter unless you have some kind of a fender rail to attach the mounts to. I knew they were too good to be true.

Posted by DC
 - March 12, 2014, 15:01:50 PM
Quote from: 49Reo on March 11, 2014, 22:39:32 PM

Osprey bags also have the shock cutout on them.

I went to their site.  Pretty pricey, but looks like good stuff.
Posted by 49Reo
 - March 11, 2014, 22:39:32 PM
Quote from: greenbarn on March 11, 2014, 18:29:52 PM

I have not, but I like the shock cutout-  looks like a good feature.  Look pretty good on the bike.

Osprey bags also have the shock cutout on them.

SMF spam blocked by CleanTalk