We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Aaron Mitchell
- October 27, 2012, 12:57:02 PMI will once its finalized, i made up some bracket by bolting a few different pieces together. once i get everything finalized im going to take it back apart and make more permanent brackets using all the same size steel and weld it up. It just may be a while before i get it finished. I get time to work on things in spurts, which sucks because projects take forever it seems
Posted by pcarrell
- October 27, 2012, 11:08:53 AMAaron, I'd be REAL interested in that! I've got the matching tour pack (It's been named "the apartment" for it's size) and have thought about adding the bags for some time. If you can, take a lot of good pics with measurements, and a short write-up on the job. I'd be most appreciative, and I'd bet that Chief would like to add it to the Mod's section of the main site.
Posted by Aaron Mitchell
- October 27, 2012, 10:47:57 AMI just finished installing some harley flh hard bags (bottoms only atm)
just so they wouldnt stick way past the back i had to made shock cutouts and even trim one corner so it didnt hit my seat.
once ive completed the project , i.e. get some lids, cut the lids and then re-fiberglass everything ill post pics up.... but idk how long it'll be.
Posted by 49Reo
- October 26, 2012, 21:21:27 PMQuote from: chief on October 24, 2012, 17:12:53 PMHey 49 if you don't see something here by Friday... give my a nudge... we have a lot going and my memory may need some reinforcement.
Nudge-nudge, poke-poke!! 
Regards and such,
49Reo
Posted by chief
- October 24, 2012, 17:12:53 PMHey 49 if you don't see something here by Friday... give my a nudge... we have a lot going and my memory may need some reinforcement.
Posted by 49Reo
- October 23, 2012, 21:18:57 PMSounds good!
Regards and such,
49Reo
Posted by chief
- October 23, 2012, 20:56:29 PMI'll have in a couple of formats on the web site later in the week... will be home tomorrow evening.
Posted by 49Reo
- October 23, 2012, 20:54:08 PMOkay, as promised, here is a material list, shop drawing, and how-to for my turn signal relocation brackets. You will have to open both attachments for the "how-to"; could not get it to upload as a wps. file, so had to scan both pages and attach them separately.
Sorry for any inconvenience;
Hope this helps;
Regards and such,
49Reo
Posted by 49Reo
- October 23, 2012, 17:30:29 PMQuote from: hawkfan on October 23, 2012, 17:20:22 PM49Reo,
Did you recieve my email from earlier today?
Thanks
Hi, just checked my email, will send it to you and cc Chief as well; should be able to do it this evening. (I hope) 
Regards and such,
49Reo
Posted by hawkfan
- October 23, 2012, 17:20:22 PM49Reo,
Did you recieve my email from earlier today?
Thanks
Posted by 49Reo
- October 23, 2012, 15:30:43 PMI sent it to you earlier this year; must have fallen through the cracks. I have it on my other computer, along with a materials required list. I'll send it to you again when I get to the other computer.
Regards and such,
49Reo
Posted by chief
- October 23, 2012, 13:00:01 PMDo we have the plan online?
Posted by 49Reo
- October 22, 2012, 22:47:18 PMIf you build your own signal light relocation brackets, you can go to a longer bag; I did that, moved my signal lights back about 5" to accommodate a set of large leather saddlebags. I can email you a shop drawing for relocation brackets if you want.
Regards and such,
49Reo
Posted by hawkfan
- October 22, 2012, 20:07:29 PMThe bags I'm looking at a flat across the back.
http://www.ebay.com/itm/251169479849?item=251169479849&viewitem=&vxp=mtr
Posted by pcarrell
- October 22, 2012, 19:54:55 PMAre you taking into accommodation for a cutout for the shocks. that might give you the extra couple inches.