GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Nanook
- March 27, 2016, 08:15:42 AMSorry for the late reply the trailer is a canadian company called armoric design her's the link
http://www.armoricdesign.com/en/?noredirect=en_US
Here's a picture with an indian, not mine bute sure sweet looking, I could post a better picture of mine with the trailer if you like 
Quote from: Zoar on February 15, 2016, 15:22:22 PMI did your trailer!
Did you make that? or did you buy it? If so where can I get one?
Posted by Zoar
- February 15, 2016, 15:22:22 PMQuote from: Nanook on February 13, 2016, 13:32:08 PMI did your trailer!
I installed a set on my 800 last summer, without baffle It was as loud or louder than v&h longshot!You can install fishtale at an angle, it's pretty common on other brand
Did you make that? or did you buy it? If so where can I get one?
Posted by Trall
- February 14, 2016, 14:34:54 PMSounds like To many sound laws..............
I PM'd Nanook and here is his appreciated PM back for those wanting a owners opinion of what the Road Burner Exhaust sounds like from from the box without adding Smatpartz baffle to make it more police friendly in his neck of the world-
Quote from: Nanook on February 13, 2016, 20:54:42 PMFYI- I bought my Road House set off a vender out of CA on eBay. They were selling for $400 including S/H. I paid that but after a shipping delay, I contacted the seller and was initially going to cancel because of the wait but then got a 20% off if I waited 3 extra weeks and agreed. So for $320 with S/H was worth the wait for a brand new set. I am not sure if they will have more sets when I checked last it said out of stock. Road house is the sister company made by HardChrome that still sells the exact same set $500.The sound without baffle is loud, but it's a beautiful round sound, like a big inboard boat sound with a low gurgle. If it was'nt for the police I think I might have kept it that way, but it sure would not have been pleasant for my neighbour when I take off at 7am to go to work. Even with the smatpartz baffle I've been stopped by the police 2 times in the last two month. They finally let me go, but I could have been charge with a 300$ fine.
Posted by Troll
- February 13, 2016, 19:34:05 PMQuote from: Trall on February 13, 2016, 17:42:16 PMUhhhhh....read this: (625 ILCS 5/12-602) (from Ch. 95 1/2, par. 12-602)Hi there from Illinois. Your a tad bit north of me..... Thanks for the Road Burner post. Cool Bike and trailer you have......I will be installing mine soon. They look really Awesome/Cool on your bike. I seen your other posts about the VH pipes / Road Burner and the Smartpartz baffle you can add- http://www.smartpartz.com/SPZRB275.html Thanks Again.....
If you did not have a police sound issue which I don't would you-
Do the Road Burner Exhaust with nothing else OR I will need to add the Smartpartz baffle because without it is crazy loud?
Did you buy the Roadhouse set from Bam Bam? That looked like a sweet set and if I had a extra money might of bought it but did not.
Sec. 12-602. Mufflers, prevention of noise.
Every motor vehicle driven or operated upon the highways of this State shall at all times be equipped with an adequate muffler or exhaust system in constant operation and properly maintained to prevent any excessive or unusual noise. No such muffler or exhaust system shall be equipped with a cutout, bypass or similar device. No person shall modify the exhaust system of a motor vehicle in a manner which will amplify or increase the noise of such vehicle above that emitted by the muffler originally installed on the vehicle, and such original muffler shall comply with all the requirements of this Section.
(Source: P.A. 77-37.)
Posted by Trall
- February 13, 2016, 17:42:16 PMHi there from Illinois. Your a tad bit north of me..... Thanks for the Road Burner post. Cool Bike and trailer you have......I will be installing mine soon. They look really Awesome/Cool on your bike. I seen your other posts about the VH pipes / Road Burner and the Smartpartz baffle you can add- http://www.smartpartz.com/SPZRB275.html Thanks Again.....
If you did not have a police sound issue which I don't would you-
Do the Road Burner Exhaust with nothing else OR I will need to add the Smartpartz baffle because without it is crazy loud? 
Did you buy the Roadhouse set from Bam Bam? That looked like a sweet set and if I had a extra money might of bought it but did not.
Posted by Nanook
- February 13, 2016, 13:32:08 PMI installed a set on my 800 last summer, without baffle It was as loud or louder than v&h longshot!You can install fishtale at an angle, it's pretty common on other brand
Posted by CDNRatMan
- January 27, 2016, 15:54:41 PMV&H and Road burners are supposed to be close in sound and db rating.
Posted by Zoar
- January 27, 2016, 14:52:32 PMQuote from: Trall on January 20, 2016, 15:56:08 PMI was wondering about the road burners too and if they were NOT as loud as the Vance and Hines...Checking if anyone has bought a Road Burner Exhaust set and installed it on their 800 Drifter? It's made by the same company Hard Chrome exhaust- http://www.hardkrome.com/motorcycle-exhaust.php?hkID=102
If you have installed the Road Burner Exhaust how do you like it?
My main question is there a way to install fishtail exhaust tips? The pipes are lined up to each other so the top pipe would have to be cut back for both tips are offset and fit somehow?or
Maybe extend the bottom pipe enough to add two fishtail exhaust tips?
Is there a way?
But sorry I cannot help you with your original post. I have no experience with them.
Posted by darkdrifter
- January 25, 2016, 10:12:53 AMHavent used one but I looks like it would be pretty easy to install and should be pretty efficient.
I'd check and see if it has removeable baffles.
Posted by Trall
- January 20, 2016, 15:56:08 PMChecking if anyone has bought a Road Burner Exhaust set and installed it on their 800 Drifter? It's made by the same company Hard Chrome exhaust- http://www.hardkrome.com/motorcycle-exhaust.php?hkID=102
If you have installed the Road Burner Exhaust how do you like it?
My main question is there a way to install fishtail exhaust tips? The pipes are lined up to each other so the top pipe would have to be cut back for both tips are offset and fit somehow?or
Maybe extend the bottom pipe enough to add two fishtail exhaust tips?
Is there a way?