GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by CDNRatMan
- November 19, 2015, 12:49:18 PMI have plans for the rest of the winter. GB is explaining how he can get me to IN and I can come and spend the winter visiting you and living the life style of a IN resident, and just sit around and watch TV and you can look after me.
Or I can stay here and make all the vids that Troll has post into one long tape and then get a couple of industrial fans and then I can watch the vids and have the fans on full to give the impression of riding......and just watch all the tapes.....
Or I can go and live in 0hi0 and hang out with GB at home and the shop to kill the winter........I could even help out at the shop and .............
Posted by pcarrell
- November 19, 2015, 09:12:12 AMAt this rate you're going to be done with the list by Christmas! Then you'll have to sit around and watch Trolls video's for 8 months until your 5 minute riding season is here.
Pace yourself!
Posted by CDNRatMan
- November 19, 2015, 01:10:59 AM 
1. Oil / filter change, DONE
2. New tires front and rear, adding counter balance beads, DONE
3. New wheel bearings front and rear, All Ball Bearing kits, DONE
4. Swing arm bearings replaced, DONE
5. Drilled rotor for the front from a Classic 800, DONE
6. New Stainless Steel Brake lines in black of course, and a +2" extension on the front one, DONE
7. Check and clean calipers as I have this all apart, DONE
8. Switching the power point to a USB type, HERE
9. Weld some tabs on the Front engine guard for new LED lights and my highway pegs,
10. Then take a bunch of parts for powder coating.
11. Replace wind screen DONE
Posted by pcarrell
- November 14, 2015, 09:23:24 AMQuote from: kw-retrorider on November 14, 2015, 05:15:41 AMThe J's don't. Only the R's do.The 1500s have a cover to remove to access the steering neck that the 800s don't have.
Posted by kw-retrorider
- November 14, 2015, 05:15:41 AMPilgrim: There is a step by step on the zerk install that dates to 2013 that I used to do mine. Really just pick a spot in the middle of the neck, use the correct size drill bit, then tap the hole for the zerk, then pump with grease until it comes out both ends. The 1500s have a cover to remove to access the steering neck that the 800s don't have.
http://www.vulcandrifterriders.com/forum/index.php?topic=20902.msg40593#msg40593
Posted by CDNRatMan
- November 13, 2015, 19:10:46 PMThanks PC but I did it and posted pictures, perhaps my next project I'll make a vid of it...Thanks again.
Posted by pcarrell
- November 13, 2015, 14:14:12 PMI can host a video if you can make one.
Posted by CDNRatMan
- November 13, 2015, 12:43:03 PMIf I could figure out how and how to post I would but I can take pictures......that I know how to do....lol...
Posted by Pilgrim
- November 13, 2015, 12:15:37 PMAre you going to make a video of the steering neck bearings and zerk install? Prob need to do that to my bike also.
Posted by CDNRatMan
- November 13, 2015, 12:04:24 PMSo due to the local Kawasaki Dealer policy changes and his attitude towards customers, I have decided to take my wheels to Sudbury to be mounted,so I have a 2 hour drive one way, wait then drive home, so will get some shopping in the big city done, make it a full day trip. So anyway....my list:
1. Oil / filter change, DONE
2. New tires front and rear, adding counter balance beads, Almost, beads are done,
3. New wheel bearings front and rear, All Ball Bearing kits, on order in Sudbury
4. New steering head bearings again All Ball Bearings, on order in Sudbury
5. Zerk fitting in the neck as per Troll and GB, bought here waiting till front end is off
6. Swing arm bearings replaced, DONE
7. Drilled rotor for the front from a Classic 800, DONE
8. New Stainless Steel Brake lines in black of course, and a +2" extension on the front one, HERE will be done as wheels installed
9. Check and clean calipers as I have this all apart, WAITING PARTS
10. Switching the power point to a USB type, HERE
11. Weld some tabs on the Front engine guard for new LED lights and my highway pegs,
12. Then take a bunch of parts for powder coating.
13. Replace wind screen DONE
So we are moving forward and all is well......
Posted by CDNRatMan
- October 28, 2015, 19:08:59 PMWell I have greased them each winter, but I had something that was not right, and so not knowing what has been done in the last 12 years to the bearings or what they have been through, for the price factor and peace of mind for new bearings it is well worth the time and effort.
Posted by Troll
- October 28, 2015, 18:51:24 PMThe wheel bearings are grease packed and sealed for life. I have 103,000 miles on mine, right now. The swing arm bearings are a different matter. On a 1500, they are needle roller bearings in the frame, on the 800, they are needle roller bearings located in the swing arm, itself.
Posted by Bucko
- October 28, 2015, 16:27:20 PMAlways thought that motorcycle wheel bearings, if properly lubed (granted they may not be properly lubed from the factory), should be good for the life of the bike. Frequent washing can tend to dry out the steering and swing arm bearing as they're not sealed (I don't think the swing arm bearing are sealed, are they?).
Posted by Troll
- October 28, 2015, 08:25:47 AMOh, NO! Your bike came down with Chirpies? That's a canarial disease, and if left untweeted, it can lead to more funny noises!
Posted by CDNRatMan
- October 27, 2015, 19:46:34 PM I am guessing they are the original ones so they are 16 years old, and I am going to have the tires off to be replaced so might as well do them and the cost is not to bad. So doing the wheel bearings might as well do the rest.
Also had a bit of a squirrel in the bike near the end of my trip this summer, and it was either the tires or the bearings, so will make sure it is gone.