Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - October 27, 2015, 19:49:23 PM

  I found the ATV/Motorcycle Lift from Canadian tire that the arms were not long enough to go between the frame. The arms were only 12" and on the 800 you need to be 15".....

Posted by Bucko
 - October 27, 2015, 18:40:55 PM

You don't need any mods: remove the 'stands', add a couple of appropriately placed hockey pucks and you're off to the races.

Posted by CDNRatMan
 - October 27, 2015, 10:36:55 AM

If the Harbor freight one is like the one I bought from Canadian Tire then you will have to mod it to lift on the frame not the engine.

Posted by pcarrell
 - October 27, 2015, 09:15:33 AM

I lift my 1500 on one, but I have to use a couple of 2x4's so I'm not lifting on the oil pan.

Posted by pietperson
 - October 27, 2015, 08:50:21 AM

Does the Harbor Freight motorcycle lift, not the table, but the lift need any mods to work with an 800 drifter or will it work right out of the box?

Browsing the other day I found some tips from someone who taken their site down but someone on this list had saved and archived. The site was a link on another post and I cannot find it again. Any ideas?
pietperson

SMF spam blocked by CleanTalk