Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by norman3516
 - April 18, 2015, 15:02:59 PM

i`m changing the nomad mufflers to the vulcan 750 mufflers . they will be here this week and i`m thinking of removing the goat belly and running straight pipes to the 750 mufflers .

Posted by norman3516
 - April 03, 2015, 22:18:07 PM
Quote from: richaud on April 02, 2015, 11:54:28 AM

Did the brake disc fit straight on?

i found the rotor in ebay , its for a vulcan 1500 it was brand new and i made a offer for 125 and they took it and yes if fits perfect. kawasaki wants 350 for a new one . i believe all the front 1500 vulcan rotor are all the same size . if you want to do the front wheel i can talk you threw it if you can do your own work . its not hard . pull out the bearings is the hardest part , i used a concrete anchor to pull them out . i want to buy a blind puller one day but the concrete anchor works pretty good but they are only good for a few times to pull the bearings out . i wish a 21 inch wheel would fit under the drifter fender , the vulcan 900 custom front wheel is a 21 and it has the same size bearings as drifter and i think it uses the size rotor also . it has only 1 rotor like the drifter . the 19 inch wheel is close to the top of the drifter fender so i dont think the 21 would fit with out mods to the drifter fender
Posted by Mr.Hanbar
 - April 03, 2015, 00:25:17 AM

I love the wheels idea, i wonder how would it look if the wheel was chromed to match the fork and other visible chromed areas....but it looks great.

8)

Posted by richaud
 - April 02, 2015, 11:54:28 AM

Did the brake disc fit straight on?

Posted by richaud
 - April 02, 2015, 05:09:58 AM

Norman... The Day you feel bored. .I'm open for you doing a 88 wheel for me;)..

Posted by bambam0099
 - March 27, 2015, 20:40:09 PM

Looks beautiful/   The dual exhaust is awesome.

Posted by HappyRider
 - March 26, 2015, 19:23:19 PM

super clean bike. really like the pipes.

Posted by Reveen
 - March 26, 2015, 19:18:47 PM

That front wheel is awesome! Loving the exhaust as well.

Posted by Bucko
 - March 26, 2015, 17:38:44 PM
Quote from: greenbarn on March 25, 2015, 21:47:42 PM

Nice look, I love the duals.

What size  nomad did those came off of?

Ya, dualies look nice on the Drifter.
Posted by norman3516
 - March 26, 2015, 17:22:43 PM

thanks everyone , elmo the rear wheel go`s right on , the front wheel , all i had to do was get drifter bearings and drill the middle of the wheel out so the drifter axle would work , greenbarn , the exhaust is from a 1600 nomad , richaud , the front wheel that i`m using is from the vulcan 1500 88 and i beleave they have the speedo on the front wheel also

Posted by richaud
 - March 26, 2015, 03:09:17 AM

That Wheel made my mouth water;) Unfortunately I got the 99 version with speedo on front Wheel so It's a dead end for me

Posted by greenbarn
 - March 25, 2015, 21:47:42 PM

Nice look, I love the duals.

What size  nomad did those came off of?

Posted by Bucko
 - March 25, 2015, 19:40:19 PM

I like that front wheel.

Like the look of the bike as it is - reminds me how great they look without all the crap I've added on mine. :)

Posted by DC
 - March 25, 2015, 18:22:12 PM

Looks great!   8)

Posted by Elmo Hayride
 - March 25, 2015, 15:50:17 PM

That looks good Norman, how much mod to get the wheels to fit? The exhaust is nice and clean.

SMF spam blocked by CleanTalk