Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - March 23, 2015, 20:29:17 PM

BRASS...after all that art work....darn him....

Posted by greenbarn
 - March 23, 2015, 20:04:01 PM

Not sure yours would work...  this one is going on the 800 on a corbin solo.

Thinking of maybe 1/2" brass round stock...  Either that or black

Posted by Pilgrim
 - March 23, 2015, 17:55:06 PM

No problem...you going to chrome or powder coat it.
I will send you my seat rail to use for a template if you need me to.

Posted by greenbarn
 - March 21, 2015, 14:34:04 PM
Quote from: Pilgrim on March 21, 2015, 12:55:39 PM

Mics at .500 or 1/2 inch

Thank you, Brother!   Let's see if I can bend some rod now.....
Posted by Pilgrim
 - March 21, 2015, 12:55:39 PM

Mics at .500 or 1/2 inch

Posted by greenbarn
 - March 20, 2015, 20:06:46 PM

Those do look good.  I like.   

Posted by badboy194
 - March 19, 2015, 23:39:43 PM

And on someone's nice Drifter.

Posted by badboy194
 - March 19, 2015, 23:06:15 PM

[/img][/img]True, those BB bags are not cheap, but they sure look good.  Check out all the old HD's with them on.

Posted by greenbarn
 - March 14, 2015, 22:15:41 PM

I'm concerned, too, how they'll fit with the shocks.  Time will tell.   This project is on the back burner, since i'm in the middle of re-doing the 800.

I do like those BB repro bags, too.   That's a lot more than I had to pay for the HD bags, though..

Posted by badboy194
 - March 14, 2015, 21:34:02 PM

The Road King Classic bags don't look bad.  Might be a tad big and might not fit well because of the shocks, but the shape is great.  If total carrying size is only an occasional problem you might look into something more period looking.

http://www.bbreproductions.com/index.htm

Posted by greenbarn
 - March 14, 2015, 20:08:18 PM

Well, I found some HD bags I bought at the swap meet....    If I don't like them up against the Drifter, they'll be up for sale.

Posted by Troll
 - March 14, 2015, 19:36:19 PM

Have you seen them mounted on a 1500? They are quite small top to bottom but very wide....about 2 axe handles wide, if you get my Drift!

Posted by bikee
 - March 14, 2015, 17:29:13 PM

Here are the bags by saddleline.com in perfect balance size for the fenders.

http://www.ebay.com/itm/251876431126?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

any comments ..

Posted by greenbarn
 - February 23, 2015, 06:41:04 AM

Can someone with a solo seat rail measure the OD of the tubing for me?  I'm wanting to fabricate one, and I thought I'd better get the low-down on the size so I don't have to guess.  Looks like about 3/8-1/2" in the various  pics I have found...    I'm guessing they might vary from one to the next.

A picture to go along with your measurements would be appreciated as well...

Thanks in advance....

Posted by greenbarn
 - February 15, 2015, 15:20:12 PM
Quote from: CDNRatMan on February 15, 2015, 15:04:55 PM

Ok, what are you after?

Hmmm.....  My F&S leather bags, although I like the look OK, are not big enough.  I think the hard bags with leather covering is a good compromise between usefulness and extra space while still looking nice on the bike ( with the leather).... If the shape blends in well enough.

I haven't asked the boss yet.

SMF spam blocked by CleanTalk