We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Reveen
- March 27, 2015, 17:37:06 PMLOL
That's awesome news, now I can just pick some up and not have to order some online and pay $6 shipping for a $.50 bolt! Thanks for your help!
Posted by Troll
- March 27, 2015, 13:40:16 PMQuote from: pcarrell on March 27, 2015, 11:11:06 AMTroll made a mistake!!!!
The world is coming to an end! Run for the hills!
I make lots of mistakes, just ask my wife...
Posted by CDNRatMan
- March 27, 2015, 11:20:22 AMFor a Pastor you are some rough on the old man..........thought you would be gentle on the old fellow..........
Posted by pcarrell
- March 27, 2015, 11:11:06 AMQuote from: Troll on March 27, 2015, 09:03:37 AMTroll made a mistake!!!!I just went out in the cold(20 deg) garage and checked...I was wrong, it is 6x1.0...sorry, I knew there were a common size, just got the pitch wrong. I could blame it on being old, but I won't....
The world is coming to an end! Run for the hills! 
Posted by Troll
- March 27, 2015, 09:03:37 AMI just went out in the cold(20 deg) garage and checked...I was wrong, it is 6x1.0...sorry, I knew there were a common size, just got the pitch wrong. I could blame it on being old, but I won't....
Posted by richaud
- March 27, 2015, 08:32:35 AMThe bolts for The dual seat horse shue bracket is 1.25. Same with bolts for handlebars down at triple tree.
Posted by Troll
- March 27, 2015, 08:26:33 AMDon't think they are that thread...I could check, but they are pretty standard sizes....
Posted by greenbarn
- March 26, 2015, 21:29:13 PMSure they're not 6 x 1.0? I was thinking off the top of my head they were 6 by 1.0, but I don't know for sure without checking.
Posted by Troll
- March 26, 2015, 19:53:35 PMYou don't live that far from me...all the HW stores, wal mart, everybody has that size...home depot, menard's...
Posted by Reveen
- March 26, 2015, 19:28:44 PMQuote from: Troll on March 26, 2015, 19:22:51 PMI'm not a very handy guy, so all of this is pretty foreign to me right now. They had M6 x 1.00 and M8 x 1.25 at both stores, but not the M6 x 1.25. Just doing to searching online and am coming across the same issue.That's about as standard a metric size as there is....considered "normal" thread. 6x1.25 is the diameter and thread pitch...the length is about 12 mm.
Posted by Troll
- March 26, 2015, 19:22:51 PMThat's about as standard a metric size as there is....considered "normal" thread. 6x1.25 is the diameter and thread pitch...the length is about 12 mm.
Posted by Reveen
- March 26, 2015, 19:17:57 PMWent to 3 different hardware stores today and none of them had 6 x 1.25 . . . they more or less said "good luck finding it" because supposedly its a very odd size. Anyone know where I could find one online?
Posted by richaud
- March 25, 2015, 07:06:28 AMIf you foind any let me know.. its more or less impossible to finns that kind of fine thread here in sweden.
Posted by chief
- March 24, 2015, 16:06:03 PMQuote from: John Hopkins on March 23, 2015, 19:45:06 PMBefore you rush off you might want to consider butterfly or wing bolts, it means you can remove the seat without a spanner or wrench.
John.
With my corbin there is barely enough room for the socket to remove the oem bolt! A wing bolt won't work for mine. Not enough room to turn it !
Posted by Reveen
- March 24, 2015, 06:52:30 AMQuote from: John Hopkins on March 23, 2015, 19:45:06 PMThat's a good point John. I think I like that idea. I'll pick some of those up today. A day isn't complete without a run to the hardware store right?Before you rush off you might want to consider butterfly or wing bolts, it means you can remove the seat without a spanner or wrench.
John.