We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Bucko
- December 15, 2014, 14:51:39 PMI that 3 pointed 'crown' ring on the output shaft to the bevel drive (in the bottom picture) the 'slipper' clutch actuator?
Posted by Troll
- December 15, 2014, 13:07:24 PMWhile it's down this far, replacing the bearing is an easy process. Sure beats sending metal filings through the engine you just rebuilt.
Posted by Elmo Hayride
- December 15, 2014, 12:27:02 PMHere are a couple of shots of the front bevel gear. I will be replacing the bearing as suggested by Troll.
Posted by Elmo Hayride
- December 14, 2014, 14:23:18 PMThunder Mfg. has a kit but the don't include any of the numbers.
http://www.thundermfg.com/store/index.php?l=product_detail&p=169
Posted by John Hopkins
- December 14, 2014, 11:05:03 AMQuote from: capnconch on December 14, 2014, 05:06:52 AMIn all honesty I think it would be a waste of time..the 1600 meanstreak gives an extra top speed of about 3mph.. the Vtwin was never really designed for speed.. if you want the look and the speed go for a Vmax gen ll ...I wonder what would be the maximum bore could be done to increase displacement? I disremember what the bore/stroke combo is on the 1600cc engine as in the Mean Streak.
I've become disillusioned with speed, my Drifter has a proven top speed of 107mph and I have a Yamaha R1 Dynamite race tuned that has a proven speed of 186mph.. but the top speed limit in this country is 70mph and there is not one road in the entire country that will allow me to ride the full length at that speed, since the government discovered the revenue that could be made from speed limits and cameras I have to watch carefully for speed reductions on every road..it takes the fun out of riding..
John.
Posted by capnconch
- December 14, 2014, 05:06:52 AMI wonder what would be the maximum bore could be done to increase displacement? I disremember what the bore/stroke combo is on the 1600cc engine as in the Mean Streak.
Posted by Elmo Hayride
- December 12, 2014, 17:10:37 PMInteresting.
Posted by John Hopkins
- December 12, 2014, 13:35:53 PMQuote from: Elmo Hayride on December 08, 2014, 19:09:09 PMNo the pic with all those coils is the rotor and it has laminated cores to each coil to prevent magnetism, the stator is so called because it is static..it doesn't turn..These pic's detail the alternator rotor which has been damaged. If you look close at the first pic you can see little chunks of the magnet removed. Followed up with a pic of the metal shavings built up on the pickup coils. The last pic is just to show that the rotor is in fact...a magnet.
Incidently those coils in the third pic look overheated, although I am not an expert on Drifters so you should get a confirmation from Chief before you panic..
John.
Posted by Elmo Hayride
- December 11, 2014, 13:03:41 PMThanks for the heads up. I will order it tonight.
Posted by Troll
- December 11, 2014, 09:28:19 AMHere's a thought. While you have it all apart, there is a $35 bearing in the bevel drive that could and does fail. Mine went at about 75,000 miles and, although it didn't do any real damage to anything, it did cause quite a bit of angst and frustration....You have it all apart now, so a little preemptive replacement could save you lots of grief down the road....
Posted by Elmo Hayride
- December 10, 2014, 23:13:10 PMSure, I'd be happy to.
Posted by 49Reo
- December 10, 2014, 20:44:35 PM.....can I send you my Jeep engine.....it needs fixing.....lol
Posted by Elmo Hayride
- December 10, 2014, 19:49:07 PMHere are some images of the right side (clutch) engine cover.
Posted by chief
- December 09, 2014, 09:58:21 AMQuote from: Troll on December 05, 2014, 09:12:30 AMFrom what I can tell, no Drifters used a POG, and none of the injected 1500s used it, either. It was strictly a carbed 1500 thing...
That is correct. No POGs on Drifters.
Posted by Elmo Hayride
- December 08, 2014, 19:09:09 PMThese pic's detail the alternator rotor which has been damaged. If you look close at the first pic you can see little chunks of the magnet removed. Followed up with a pic of the metal shavings built up on the pickup coils. The last pic is just to show that the rotor is in fact...a magnet.