GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by John Hopkins
- October 01, 2014, 18:03:12 PMI have four keys for my kwak but I have a few hundred blanks and was lucky enough to find some that matched, so I was able to cut my own..
John.
Posted by chief
- October 01, 2014, 15:53:18 PMI have some blanks but didn't need them. I got multiple keys made at the local locksmith. I had to use a jeweler's file on a couple to get them to work properly. I bought the blanks from Kaw...
Posted by Bucko
- October 01, 2014, 11:16:02 AMProbably not what you're interested in but you can buy the entire lock set (ignition, tank, side cover and steering lock) with keys from Kawasaki. I know because I've had mine replaced three times, once under warranty when the steering lock broke, in the locked position of course, and twice due to damage caused by thieving pricks who tried to steal the bike. You can find lock sets on eBay occasionally for quite a bit lower cost than from a dealer.
Posted by DC
- October 01, 2014, 10:55:18 AMQuote from: jmbo on October 01, 2014, 02:22:00 AMThanks! Saw a link there for multiple key blanks and ordered 5, as I need separate keys for the fork lock made.
Posted by DC
- October 01, 2014, 10:53:48 AMQuote from: greenbarn on September 30, 2014, 21:31:58 PMI was checking local places for the blanks and no one seemed to have them. They kind of looked cross-eyed at me like "Why would I have something like that?".I bought one for the 800 at our local Ace hardware. Anybody that cuts keys may have the right blanks - you should be able to call in advance to see if they have motorcycle blanks. As a backup, the stealership should be able to provide, at somewhere around 2-10X the cost of Ace.
I heard stories about the stealership prices and that's not happening!
Just ordered them on FleaBay. I have to have separate keys for the ignition and forks, since at some point the ignition was replaced and is not original. Hopefully a locksmith can cut keys for the fork lock, based on the number on the cylinder.
Posted by jmbo
- October 01, 2014, 02:22:00 AMPosted by Bucko
- October 01, 2014, 01:27:49 AMOriginal key blanks are available from Kawasaki but they're expensive - I can't remember how much at this point but too much (even though I bought some 
). I ordered them online somewhere, with a bunch of other OEM parts - to help hide the pain.
Posted by greenbarn
- September 30, 2014, 21:31:58 PMI bought one for the 800 at our local Ace hardware. Anybody that cuts keys may have the right blanks - you should be able to call in advance to see if they have motorcycle blanks. As a backup, the stealership should be able to provide, at somewhere around 2-10X the cost of Ace.
Posted by CDNRatMan
- September 30, 2014, 21:30:37 PMWell I had the same issue and so I walked into Jim's Locksmithing, and showed them the key, they found one that matched copied it and it works really well, so had a second one cut.......oh and at $5.00 it was a deal.
Posted by DC
- September 30, 2014, 21:15:11 PMThe previous own of my bike only had one key. I need to have a spare, just in case. From what I've read so far in various places, people would buy the key blanks and go to a locksmith or Ace hardware store to have them cut. I checked one site out that used to sell the blanks, but they are down for a while. Any ideas where the best place is to get the most reasonable key blank?