GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Goombah
- August 19, 2010, 03:52:43 AMI tried to buy a couple from my local Kaw dealer(Big Dealership) and they don't stock them,didnt know what size they were. Now I don't know,but I find that to be pretty freekin' sorry of a dealership to just shrug their shoulders over a grease zerk. I have a couple....somewhere,I know I put them somewhere where I wouldn't forget where I put them. LOL I will try to remember tomorrow to look in the garage. It is a good excuse for me to look that someone else needs to know. I really should try to find them,as I do need to grease mine as well.I lowered my drifter,and removed them and put in plugs,as so I would not sheer them off on a driveway or something.
Posted by 04Drifter
- August 15, 2010, 21:33:33 PMI am getting ready to replace mine, as one is sheared off ,which won't be fun getting out, and the other two did the same thing as yours.Will let you know what I find out.
Have to deal with gas smell first,so may not be soon.
Posted by cochise
- July 27, 2010, 22:50:39 PMThere is a tool called a thread guage. You line up the threads on the fitting with the correct guage, and its printed on the side what size and number of threads are. They usually come in a tap and die kit, or can be bought separetly.
Posted by Master Gates
- July 25, 2010, 13:24:18 PMDoes anyone know the size of the grease fittings used on the 800? There are three of them under the bike for the suspension and I am looking to replace them. Went to lube it and the grease was coming back out of the fitting after I took the grease gun off, then continued to drip a bit. Must be some dirt in there or something that is not allowing that ball to seal off the opening properly. I dont want to mess things up ruin any threads 
TIA