GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by moosewayne
- February 20, 2014, 10:21:14 AMHey Bucko,
I have an exhaust as well.
Dan's measurements are spot on perfect.
Posted by Elmo Hayride
- February 18, 2014, 15:33:57 PMThe pipe measurements are smaller than the clamp sizes because the pipes go inside the goat bladder/clamps.
Posted by Elmo Hayride
- February 17, 2014, 21:25:36 PMThe pipe dimensions are:
2 @ 35mm & 1 @ 43mm.
Dave
Posted by Bucko
- February 17, 2014, 19:39:39 PMAwesome. Thanks Dave. And, yes, I was referring to the goats bladder clamps. If yours are like mine, they're quite rusty.
Just to confirm, are those pipe diameter measurements? Thanks again.
Posted by Elmo Hayride
- February 17, 2014, 18:01:49 PMThe part numbers are the same for mine and yours provided you mean the heavy duty clamps on the goats bladder to the pipes.
Dave
Posted by Elmo Hayride
- February 17, 2014, 17:53:06 PMI have:
2 @ 43 mm & 1 @ 50mm
My bike is a '99 1500 Drifter
Dave
Posted by Bucko
- February 17, 2014, 17:10:56 PMHoping that someone can offer some advice on this....
I'd like to replace the original rusty clamps on my 01, 1500 Drifter exhaust/Goats Bladder with stainless Steel clamps. Does anyone happen to have an original Drifter exhaust handy and could measure the size (width and circumference - or are clamps specked by diameter?) of the three clamps?
I'm pretty sure newer 1500 Classics and maybe Drifters, came with chrome clamps but I'm not sure they're the same size as the clamps on my 01. In any case, I think I'd prefer to go Stainless Steel.
My bike's in storage and not easily assessed. Thanks for any advice.