Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - June 29, 2013, 11:29:32 AM

 the 30Amp fuse  spare is a spare for the main fuse. All the rest are 10 amp fuses so really you only have one spare. When I added my spotlights I added a in line fuse of 15 amps and the wired it in. and have all the original 10 amps fuses. But over the winter I replaced all the fuses because I did not know how old or what they had been through. I carry a small container with a few extras in my right side case.

Posted by Troll
 - June 29, 2013, 07:48:18 AM

This is probably going to be ok for the short run, but you shouldn't leave it like that. Find out what blew the fuse and replace the 10 with a 10. If they connected the power for the aux. lights directly to the high beam for power, that's not good, either. It should be on it's own circuit, preferably with a relay.

Posted by Gerhardberger
 - June 29, 2013, 05:43:08 AM

Problem solved. I opened the fuse box, and fuse numer 5 was burnedout. The bike had its original two spare fuses, the 10a and the 30a. But...why a 30a sparefuse, if all the priginal fuses are of 10a? Probably for the case youinstall a accesory. So, this time, and after having checked that the new lights are linked to the standard long lights, i changed the fuse from 10a to 39 a. Dou you see any problem with this ?
Thank you all for the replys and information...

Posted by Gerhardberger
 - June 29, 2013, 03:47:51 AM

Good idea. To get to the fuses....shall y dismount the seat first, and then look after them in theor box. I will exchange fuse 2 with 5, and see if it works. I'm worried although if its not that, the problem... :( :(

Posted by CDNRatMan
 - June 28, 2013, 21:15:01 PM

you might be able to move the horn or another fuse not needed to the light fuse, I always carry a few spares, so this is never an issue. Be interested in how they wired in your additional lights. perhaps you can just disconnect them? Run jus the normal lights.

Posted by Troll
 - June 28, 2013, 19:51:26 PM

here, try this link. lots of vn800 wiring diagrams
https://www.google.com/search?q=kawasaki+vn800+wiring+diagrams&client=firefox-a&hs=E7P&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=SS7OUdaKMJLLyAG3g4DQAw&ved=0CC8QsAQ&biw=1440&bih=746
I suspect the additional lights added are causing the problem. Headlight is on a separate circuit.

Posted by Gerhardberger
 - June 28, 2013, 18:59:58 PM

I on holidays in the coast of cadiz. I was returning from a bar today at 1am, and suddenly my Short lights and long lights went off. Only my position lights and my fender indian allowed me to see a coulple om meters ahead, covering the 6 miles to my hotel quite slowly.
It's strange but it looks like it hass been a bad work from my local garage after installing me my additional lights. I'm not sure if they istalled a resistance with them.
I hope that the electrical system is ok, and that only the fuse has burned out...it's the same fuse of shorts and long lights? If it's only that problem...and tomorrow it's saturtay and no garage will be open, how can i substitute that fuse? Is it a common fuse, or is it special?
Help...my holidays are in danger....

SMF spam blocked by CleanTalk