We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Troll
- May 14, 2013, 07:31:31 AMSo, are you talking about a 1500 or an 800...they are different. Like I said, you could probably make some kind of internal framework to support the fender, but you will need something...
Posted by Drift1
- May 14, 2013, 05:08:12 AMHere's a pic of probably the most well known,most traveled drifter "Olive"notice NO rear bracket
Posted by waltervl
- May 14, 2013, 01:38:08 AMNo, you do not need that vertical cover. It is just a cover. Under it is the mounting frame of the turn signals. (if we are talking about the same thing 
)
This cover was introduced with the chrome version of the Drifter.
Posted by topherloaf
- May 13, 2013, 21:57:48 PMAwwwww dang it. Ok. Oh well. If I have to I have to.
Posted by Troll
- May 13, 2013, 19:42:39 PMIt's all one piece
Posted by topherloaf
- May 13, 2013, 19:01:59 PMSo according to another post here, I don't need the part the signals are on though right?
Posted by Troll
- May 13, 2013, 18:28:11 PMThat's what's holding the rear fender on...I suppose you could make some kind of internal framework, but remember how easy it is to remove the fender the way it is now.
Posted by topherloaf
- May 13, 2013, 18:20:59 PMOk let's try this, it's black on here however, mine was chrome. It's the piece that the rear turn signals attach to and the bracket that piece is mounted to as well.
Posted by topherloaf
- May 13, 2013, 18:14:34 PMSince I don't own a drifter rear fender or its parts anymore, I'll see if I can source a photo of what I'm referring too. Brb!
Posted by pcarrell
- May 13, 2013, 17:11:25 PM
Posted by Troll
- May 13, 2013, 17:04:19 PMWhat we need here is...wait for it...A PICTURE!!!
Posted by Drift1
- May 13, 2013, 16:51:27 PMI'm not sure what your refering to here either,THL?If your refering to the "bumper"that the rear tail lights also atatch to,I've seen plenty of Drifters without it.Gives that plain big fender look.If you Google Drifter images you'll see a few right off the bat without this.Olive of course the I've bike,has round tail light,right to the fender with smaller blinkers fixed to each side.
Posted by CDNRatMan
- May 13, 2013, 15:15:15 PMSorry seem to be missing some info here but yes the rear fender is held on with the bracket and a couple of small screws into the frame....
Posted by topherloaf
- May 13, 2013, 14:05:02 PMAh ha!
Posted by Troll
- May 13, 2013, 13:54:10 PMI'm not sure on the 800, but on the 1500 that bumper holds up the back of the fender, and I believe it does on the 800 too...