Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Rowe
 - August 13, 2011, 19:13:48 PM

and you recommend plugging it up? Cloth? Tie it off?

Posted by Troll
 - August 13, 2011, 19:07:04 PM

It goes into a hole in the back of the right airbox that you don't have. Right near the end is a mark where the hose passed through the backing plate...

Posted by Rowe
 - August 13, 2011, 18:41:13 PM

Yes, 1/2" diameter, long pre shaped double curve form. You say they plug it up?? I am back firing, which is why Im revisiting this. It looks like there was a ring / clamp on it at sometime.

Posted by Troll
 - August 13, 2011, 18:10:36 PM

Is it about 1/2" inside diameter? It's probably the air intake for the decel valve...the one that everybody plugs to stop the backfiring.

Posted by Rowe
 - August 13, 2011, 17:53:00 PM

Ok,

I'm almost done with a front bevel gear bearing (and shim) replacement, I am reassembling, have test driven it - all ok, except! for the life of me, I cannot see where to attach one of the vacuum switch hoses. I have the ones that lead to the switches on the cylinders on ok, the narrow one that heads over towards the throttle body is ok too.  I suspect the last one, largest diameter that leads from the brake side of the bike, heads towards the air cleaner assembly, but I don't see it. Parts fiche, Google, Clymers and Kawasaki service manual doesn't show it as far as I can see. Where does that hose go?

I should mention that there is a Kuryakyn air charger on it - which I'll eventually replace since I can't hug the tank properly with it there.

Thanks!

SMF spam blocked by CleanTalk