Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 800 Only
► Modify message ( Re: Aftermarket Exhaust )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

I have a set of vance and hines long shots on my 800 drifter. I had a set of stock pipes for my wifes 1100 sabre sitting around, and someone on craigslist was looking to trade his new longshots for a set of stock pipes for his sabre because he didnt like "the noise". I cut my muffler off where it mates to the headpipes, wrapped some shimstock around the stock headpipe tubes and slipped on the longshots. I used the stock clamps from the longshots and had to make a hanger strap to attach the longshots bracket to the drifter, and then had to slip a stainless hoseclamp through the top heatsheild mount [It blends so well you wont notice]. They sound a lot better than the stock muffler that the previous owner had drilled out, and the diameter is the same as the stock heatsheilds. Since they were "free" I bought the vance and hines viper tips to direct the exaust soot away from the rear fender. The previous owner had already rejetted the carb so it was all done at that point. they look like they came that way, and they extend to the end of the fender.

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief

- June 15, 2011, 16:42:12 PM

FYI - like the 1500, any pipes made for the 800 CLASSIC will fit the 800 drifter with the addition of the right rear footpeg bracket.

Posted by gaillarry

- June 15, 2011, 14:29:05 PM

After numerous phone calls to large retail outlest found a set of Hard Krome's at Dennis Kirk, the last one in stock. They now list them as not available anymore. Should have them this week !!!!

Posted by jamman

- June 15, 2011, 12:17:29 PM

I have a set of the Hard Krome's on mine ...

http://www.hardkrome.com/motorcycle-exhaust.php?hkID=104

Posted by chief

- June 10, 2011, 15:27:49 PM

I don't know of any for the 800, natively. I expect you can mod some in the same fashion as the 1500.

Posted by gaillarry

- June 09, 2011, 18:47:03 PM

Looking for a dual aftermarket exhaust that extends to the end of the bike. Any suggestions?

SMF spam blocked by CleanTalk