Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by gwilki
 - September 25, 2021, 12:34:55 PM

I replaced the 22-year old rubber brake lines with stainless steel. It's just seat of the pants observation, but I believe the brakes, particularly the rear, are much better. I'm sure that others here will say that it's not possible, but since you are looking for options, I believe that new lines are one to think about.

Posted by chief
 - September 23, 2021, 22:07:39 PM

Here is some info which may help with brake pads.

Brake Pads and Bleeding

The OEM part number for 99/00 REAR pads is different from the 01-later. But aftermarket pad makers use the same pads for all years... if that makes sense.

I don't think braking is different between years, so it really has to be something in the braking system... Pads, bleeding/air, rotors within specs, brake cylinders inspection/rebuild.

Posted by Bucko
 - September 23, 2021, 18:30:50 PM
Quote from: chief on September 22, 2021, 15:45:37 PM

I would suggest you have a look at the brake pads first, and then check out the brake system itself. I've found the braking to be good on my 2002.

Agreed.  Having said that.  The brakes on my 01 are better than the brakes on the 99 (which are still good enough).  I assume it's different pads, however the work invoice I got from the PO shows the 99 has the same pads (double sintered) as the 01 - I need to verify that sometime.  I flushed both front rear of the 99 when I picked it up and the front improved dramatically but the rear (which is exceptionally stong on my 01) didn't improve with the flush.
Posted by chief
 - September 22, 2021, 15:45:37 PM
Quote from: Highc5555 on September 22, 2021, 10:28:20 AM

Does anyone know if there is a brake upgrade I can put on my 99 Drifter? I'm a big guy and I find the braking leaves something to be desired when decelerating from highway speeds. thanks in advance.

I would suggest you have a look at the brake pads first, and then check out the brake system itself. I've found the braking to be good on my 2002.

Posted by Highc5555
 - September 22, 2021, 10:28:20 AM

Does anyone know if there is a brake upgrade I can put on my 99 Drifter? I'm a big guy and I find the braking leaves something to be desired when decelerating from highway speeds. thanks in advance.

SMF spam blocked by CleanTalk