Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by drifterbob
 - April 01, 2011, 17:08:01 PM

Hi all, need some info on ign work on my 1500 Drifte (2002).   I have a Thunder (Harley type) ign sw. I've located on the left side (tool) cover. I want to leave the old sw intact and splice in the new one for ign only (no park lite)  The info from Thunder shows puting a 100 ohm resistor in line with one ign wire (there are 2 ign wires), I've had the old (stock) sw apart and don't see a resistor there.  Do I need the resistor?  My thoughts were splicing into the 2 ign wires and Batt wire, then tying the 2 ign wire together on the new sw post.  If any ones been there I would love to hear from you.      Thanks, Drifter Bob

SMF spam blocked by CleanTalk