Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - June 26, 2009, 22:28:38 PM

Haven't seen that problem, before. Mine does take a firm shift at times to get back into first. I'll see if I can find anything on this.

Cheers.

Posted by texscowboy
 - June 26, 2009, 21:39:14 PM

I have a 99 1500 drifter.  16,000 miles. OK, before hand i have changed the oil and filter, i have rebuilt the clutch master cylinder. After you ride for awhile and the engine is hot. When you are trying to put it into first gear it grinds like the clutch is not in. You have to kind of snap it into gear, you can't be gentle with it. Once it is in gear it does not move with the clutch in and has never slipped. Other than that it shifts perfectly into all gears up and down. Does not grind when engine is cool and first starting a ride. Thinking maybe the clutch plates are swelling from the heat?

Any ideas would be helpfull.  THANK YOU

SMF spam blocked by CleanTalk