Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Tfrank59
 - March 14, 2018, 13:19:54 PM

Follow-up: that Novus stuff worked great.  Didn't want to even try the #3 grade, which is for deep scratches; I used the #2 grade for fine scratches, then the #1 clean and shine--all pretty again!  Thanks.

Posted by Old Drifter
 - March 13, 2018, 15:09:26 PM

Yes, that should be fine. You may need to use a lot of elbow grease depending on how bad the scuffing is. I also used to use that on my H-D windshields years ago. 

Posted by Tfrank59
 - March 13, 2018, 13:31:43 PM
Quote from: Old Drifter on March 12, 2018, 20:33:33 PM

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

I was looking through my stuff in the garage and I have this from when I was polishing the lexan windshield on my other bike do you think this is okay?
Posted by Pilgrim
 - March 13, 2018, 12:49:05 PM

claybar it for shine

Posted by Tfrank59
 - March 13, 2018, 12:27:56 PM
Quote from: Old Drifter on March 12, 2018, 20:33:33 PM

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

so since they're painted is it possible to polish through the paint, and if so to what extent can I polish and not do that?  thanks.

Posted by CDNRatMan
 - March 12, 2018, 20:57:19 PM

 8) Gene old buddy old pal, perhaps this summer you should ride up here and show me how it is done.......

Posted by Old Drifter
 - March 12, 2018, 20:33:33 PM

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

Posted by Tfrank59
 - March 12, 2018, 18:40:50 PM

Anybody know how to get some light scratches or scuffs out of plastic Drifter fenders? I tried using turtle wax and elbow grease and it does a little bit but not quite and I'm afraid to use anything abrasive. Anybody got any ideas or experience polishing plastic fenders? Thanks.

I just found this video but I don't think that's the way to go on a two-tone Drifter fender, but anybody know different?
https://www.youtube.com/watch?v=mKHeZusdTTM
SMF spam blocked by CleanTalk