Buffing out Fender scuffs?

Started by Tfrank59, March 12, 2018, 18:40:50 PM

Previous topic - Next topic

Old Drifter

Glad to hear that it worked out. Now you're ready for the riding season...ride safe!

Gene

1999 Drifter

Tfrank59

Follow-up: that Novus stuff worked great.  Didn't want to even try the #3 grade, which is for deep scratches; I used the #2 grade for fine scratches, then the #1 clean and shine--all pretty again!  Thanks.

Tom

'06 Drifter 800, '98 Valkyrie

"HD: The most efficient way to convert gasoline into noise without the pesky effects of horsepower."

Old Drifter

Yes, that should be fine. You may need to use a lot of elbow grease depending on how bad the scuffing is. I also used to use that on my H-D windshields years ago. 

Gene

1999 Drifter

Tfrank59

Quote from: Old Drifter on March 12, 2018, 20:33:33 PM

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

I was looking through my stuff in the garage and I have this from when I was polishing the lexan windshield on my other bike do you think this is okay?
Tom

'06 Drifter 800, '98 Valkyrie

"HD: The most efficient way to convert gasoline into noise without the pesky effects of horsepower."

Pilgrim


Tfrank59

Quote from: Old Drifter on March 12, 2018, 20:33:33 PM

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

so since they're painted is it possible to polish through the paint, and if so to what extent can I polish and not do that?  thanks.

Tom

'06 Drifter 800, '98 Valkyrie

"HD: The most efficient way to convert gasoline into noise without the pesky effects of horsepower."

CDNRatMan

 8) Gene old buddy old pal, perhaps this summer you should ride up here and show me how it is done.......

GPS is not to get you THERE but rather to get you home from THERE

Old Drifter

That video is for soft plastic colored fenders. Not what you want for sure. Although the Drifter fenders are plastic, they are painted with automotive type finishes. I'm no expert by any stretch of the imagination. I'd use the finest type polishing compound you can find and a good cleaner wax. I usually use Turtle Wax Premium Rubbing Compound (clear coat safe) and then Meguiar's liquid cleaner wax. My 2 cents.

Gene

1999 Drifter

Tfrank59

#1

Anybody know how to get some light scratches or scuffs out of plastic Drifter fenders? I tried using turtle wax and elbow grease and it does a little bit but not quite and I'm afraid to use anything abrasive. Anybody got any ideas or experience polishing plastic fenders? Thanks.

I just found this video but I don't think that's the way to go on a two-tone Drifter fender, but anybody know different?
https://www.youtube.com/watch?v=mKHeZusdTTM
Tom

'06 Drifter 800, '98 Valkyrie

"HD: The most efficient way to convert gasoline into noise without the pesky effects of horsepower."

SMF spam blocked by CleanTalk