We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by drifter-paul
- December 18, 2017, 01:35:29 AMThanks guys,
That explains "running lights".
We just have amber indicators front and rear - makes me wonder why the rear indicator part number should be different from Canada/US.
Posted by CDNRatMan
- December 17, 2017, 23:18:12 PMI know in Canada and the US the Drifters had no marker or running lights in the rear. The front signal lights have 3 wires and run a 1157 bulb and the rear is a 2 wire setup, I have taken the front signal light guts out of the housing because the housings are different and put the three wire ones into the rear of the bike making it so I have running / marker lights and turn signals. But in Canada once you do that you need to change the cover to red and not have it amber.......
Posted by Bucko
- December 17, 2017, 23:01:25 PMNot 100% clear on what your asking but the North American model had amber 'running' lights on the front and amber turn signals on the rear, i.e. no running lights on rear. You mention extra 'reds' on the back - are the Aus rear lamps red - if so that's different than NA models.
Posted by drifter-paul
- December 17, 2017, 21:50:17 PMOrdered a new left rear indicator by american part number (Ron Ayers fiche) and told that part number is not correct for Australia. Have ordered parts successfully, before. Though "running lights" were extra white lights at front, and US drifters doubled up on the use of the front indicators ? Are they also at the back as extra reds 
I thought the rears would be the same part number.