Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by drifter-paul
 - January 24, 2017, 23:38:38 PM

What are marker lights ?

Posted by jamman
 - January 11, 2017, 14:53:04 PM

Just received my order of new OEM rear turn signal mounting parts (rubber grommets, metal sleeve and cap) and the K&S rear turn signals noted above fit perfectly ! So good news there ...

Posted by CDNRatMan
 - January 11, 2017, 13:33:52 PM

 yes because inside the headlight pod there should be the same three plug connectors and then you have marker lights up front. I wired a set of 1500 signal lights in on the rear of my 800 and just added a common ground wire so I have rear marker lights.

Posted by jamman
 - January 11, 2017, 13:25:58 PM

Just got the BikeMaster 262175 front turn signals in and they are 3 wire - so that's good !

Posted by jamman
 - January 11, 2017, 13:10:02 PM

Yeah thanks to Pilgrim who pointed that light bar out to me on Ebay !

Posted by mittico68
 - January 11, 2017, 11:43:26 AM

That's one of the hardest to find things...
I've been hunting around for it for a loooong time and then, finally, I've got a second hand one that is really in bad shape, so now I'm still workin' to fix it...
Good luck!

Posted by CDNRatMan
 - January 11, 2017, 11:41:32 AM

   Dude I hunted for a black light bar for a long time and found a chrome one really cheap and it was Fire and Steel (F&S) made for a Drifter, so snapped it up and had it powder coated..... still original to the bike.

Posted by jamman
 - January 11, 2017, 11:25:59 AM
Quote from: jamman on January 06, 2017, 18:22:13 PM

FYI - I found these and they seem to be a very close match on the originals

Front:
http://cycleplicity.com/products/136216-.aspx?utm_source=google&utm_medium=cpc&utm_content=136216NOFITMENT&utm_campaign=GSNOFITMENT&adtype=pla&kw=&utm_term=&adpos=1o1&network=g&gclid=COnPqtOmrtECFYKGaQodPTwEGA

Rear:
http://cycleplicity.com/products/31273-k_s_technologies_25_2176_turn_signals.aspx

These just came in and look extremely close to the originals ... will use some diodes to wiring them up as running lights ..

Got the original front turn signal bar coming and a headlight so it those will get back to stock ..

Would like to add the smaller amber 4" lights and the stock light bar .. any good source in black for those ?

Posted by jamman
 - January 07, 2017, 14:27:25 PM

Thanks ! the rubber is a bit cracked but maybe I can get the cheaper aftermarket ones and swap that out ..

Posted by CDNRatMan
 - January 07, 2017, 11:45:17 AM

  Ok the front signal lights are 3 wire the rear are 2 wire, I took the front signal lights from a 1500 and used them on the rear of my 800 so I have marker lights all around on my bike.
If those have metal housings you can powder coat them, or paint them to be black, be one way to fix that issue and you can have marker lights all around.

Posted by CDNRatMan
 - January 06, 2017, 19:34:47 PM

Not right now, but let me hunt around

Posted by jamman
 - January 06, 2017, 18:29:47 PM

You know of one that has 3 wires ?

Posted by CDNRatMan
 - January 06, 2017, 18:26:13 PM

 Only thing is that the original front on both the 800 and 1500 is a three wire setup and the front lights are also marker lights. 

SMF spam blocked by CleanTalk