GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Quote from: jamman on January 06, 2017, 18:22:13 PMThese just came in and look extremely close to the originals ... will use some diodes to wiring them up as running lights ..FYI - I found these and they seem to be a very close match on the originals
Rear:
http://cycleplicity.com/products/31273-k_s_technologies_25_2176_turn_signals.aspx
Got the original front turn signal bar coming and a headlight so it those will get back to stock ..
Would like to add the smaller amber 4" lights and the stock light bar .. any good source in black for those ?
Thanks ! the rubber is a bit cracked but maybe I can get the cheaper aftermarket ones and swap that out ..
Ok the front signal lights are 3 wire the rear are 2 wire, I took the front signal lights from a 1500 and used them on the rear of my 800 so I have marker lights all around on my bike.
If those have metal housings you can powder coat them, or paint them to be black, be one way to fix that issue and you can have marker lights all around.
I found these would have to paint them black and not sure they would fit the rear
Not right now, but let me hunt around
You know of one that has 3 wires ?
Only thing is that the original front on both the 800 and 1500 is a three wire setup and the front lights are also marker lights.
FYI - I found these and they seem to be a very close match on the originals
Rear:
http://cycleplicity.com/products/31273-k_s_technologies_25_2176_turn_signals.aspx
Page created in 0.059 seconds with 12 queries.