Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by greenbarn
 - April 22, 2013, 16:31:02 PM

There are quite a few ideas on the web about making your own, in addition to the method PC listed, there are 2 more.   I looked at making baffles for my hardkrome pipes, but realized they already have baffles, and they're welded in, so I left it alone.

eye-bolt/washer method - I didn't care for this idea. (pic 1)

Second option - this is the option I was going to use - seemed like the combination of best/easiest. Unfortunately, I can't find the original info I was looking at, but basically, start with the baffle-pipe with the slots in it (same as the starting point for PC's link - Pic 2) and then use an air-chisel to punch in all of the slots towards the inside of the pipe - you end up with a baffle that resembles the one in pic 3.  you can wrap or not wrap.

If you decide you want to make them yourself, you can buy pipe at any muffler shop.  I'd recommend stainless.

Posted by Petemoss
 - April 22, 2013, 13:28:30 PM

Thank you, Pc.

Posted by pcarrell
 - April 22, 2013, 12:47:31 PM

A quick web search found this:

http://www.ebay.com/itm/New-Roadhouse-Replacement-Exhaust-Baffle-Outlaw-Pro-/300524241050

http://www.jpcycles.com/product/442-951

http://www.jcmotors.com/p-21531-roadhouse-brand-optional-25-x-1875-baffle-for-outlaw-pro-exhaust-systems.aspx#.UXV2_KJwqUM

Or you can always repair the ones you have using this as a guide (I know it's not the same brand, but the principals are the same):

http://www.gadgetjq.com/vhbagger_shhh.htm

Posted by Petemoss
 - April 22, 2013, 11:24:23 AM

Where can I find a replacement baffle for my roadhouse pipe? The po had it but wouldn't send it to me after the purchase of the bike. Can you buy them anywhere?

SMF spam blocked by CleanTalk