Adjusting the rear shock (sorry)?

[CDNRatMan]

 yes you are correct, and like it said do not try to go from 7 to one clockwise or you can really mess up the shock. New shock runs around $450.00 CDN.

[Nanook]

Isn't it the higher the number the stiffer the suspension. Highestbeing 7?

[CDNRatMan]

  Nope only ned to remove the outside cover, then look inside and towards the rear of the bike and you will see it, albeit you might need a flashlight if it is dark.  The bolt is not right there jump in your face, you have to look for it. A 12mm socket on a power bar and ratchet works really well. I am a small guy only 5'11"and 240 lbs......mine is set on 6 all the time, I also ride solo 98% of the time so it is really comfortable there.

[Ricardo]

I've read some posts as well as the instructions found here on how to adjust the rear shock: http://www.vulcandrifterriders.com/shockadjust.html

But I guess I must be thick or something, because I cant find the adjustment bolt. When I remove the left (plastic) panel, all I see is a bunch of electrics. Do I need to remove the inside plastic casing as well to reach the bolt?