Front chain sprocket

Started by ginmocny, February 26, 2013, 15:25:09 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ginmocny

#6
February 28, 2013, 17:00:06 PM

Fantastic Thank you very mush. :)

CARPE DIEM DRIFTER

#5
February 28, 2013, 16:54:03 PM

ginmocny,
You will need a 27mm socket to remove the large nut that secures the drive sprocket. Remember to unflat the retaining washer behind the nut.
All of the best, CDD

CDNRatMan

#4
February 28, 2013, 09:18:28 AM

 Surprising no one has jumped into this one yet...but I did both mine a tthe shop when I bought the bike and I remeber the rear wa s40 and I am thinking 18 was the front, but when I gert home I'll actually pull the bill and check for you.

GPS is not to get you THERE but rather to get you home from THERE

ginmocny

#3
February 28, 2013, 01:00:24 AM

I can't believe that none of you ever replace this sprocket?  :(

CDNRatMan

#2
February 26, 2013, 17:00:00 PM

  Sorry had mine done at that shop so I am not in the know on this fact.

GPS is not to get you THERE but rather to get you home from THERE

ginmocny

#1
February 26, 2013, 15:25:09 PM

I'm planning to replace oil seal and front chain sprocket in my Drifter. Anyone know what size socket I will need to remove this big nut in front of the this sprocket?

Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk