Starter Motor Removal w/o Draining Radiator

You don't need to drain the radiator to get the starter motor out. Remove the starter motor wire, and the single-wire switch on bottom of radiator. Undo two bolts on left holding starter in place, insert blade screwdriver on right side of starter and wiggle/pry to the left - settle starter motor on engine block/radiator. Undo bolt holding top of radiator to frame, move radiator 1'' forward and then up until s/motor drops into hand of assistant..

Email to Webmaster
Your comments are always welcome.

Web site design by Saftek.

Copyright © , Saftek Inc.

Duplication of any element of this
site without the express permission
of Saftek, Inc. is a violation of
law and is prohibited.


Not affiliated with Kawasaki. Kawasaki, Vulcan and Drifter are trademarks of Kawasaki.