To: Hatchet54 and DriftAway,
I apologize for such a late response, been pretty sick for some time. The answer is, Yes, if either one of you still have a set I could still use a pair of Drifter badges.
We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuTo: Hatchet54 and DriftAway,
I apologize for such a late response, been pretty sick for some time. The answer is, Yes, if either one of you still have a set I could still use a pair of Drifter badges.
Does anyone on the forum have a good address for Denny Berg aka The Creator?
I rode with him in 2010 at the Durango Drift In and want to send him some pics of the ride and some pics of the new trike.
I need to get in contact with whoever owns the Black 99 Drifter 1500 that Norm Kokes converted around 2017 or 2017. He made it into a trike like the one I had done.
If anyone knows where this bike is or has contact with the owner, let me know. I am having some minor issues with the rad.
Vinnie
Does anyone out there in Drifter land have a couple of the metal tank badges they don't want? I'm looking to do some pretty up painting.
IMPORTANT NOTE: I JUST FOUND OUT THAT NORM KOKES OF ENDEAVOR TRIKES HAS CLOSED HIS DOORS AND SOLD HIS SHOP EQUIPMENT. NOT DUE TO HEALTH OR ANYTHING BAD....HE IS 73 AND WANTS TO RETIRE. HE WAS GOING TO SELL THE SHOP TO SOMEONE TO CONTINUE PRODUCTION, BUT NO ONE BIT ON IT.
SO, HE FELT THE TIME WAS RIGHT TO RETIRE AND GOT A GOOD BID ON THE EQUIPMENT. HE IS KEEPING THE PATENT RIGHTS FOR NOW.
THAT MAKES MY 3 WHEEL CONVERSION ONE OF ONLY 103 AND THERE WERE ONLY 2 DRIFTERS EVER CONVERTED SO THATS EVEN RARER.
BINGO! I HAVE AN INSTANT MUSEUM PIECE. 
Thanks for the info Chief, I got it figured out. These were taken about 2 months ago in Baxter Springs, KS. The 66 Station is right on Route 66. its now a tourist deal but it makes the Drifter look great! 
My 2 cents worth. I had upright "wings" welded on to the back rail to support a pair of bags and keep them off the fender entirely. I do agree that anything in the bags gets tossed around pretty roughly! I had a small shock pump in a metal case with padding and the case got mangled in the tossing. Also my tools were tossed out ot the little tool wraps I had. This was just after about 10 miles on a gravel road. Not my choice to ride..... Went back to OEM struts
To Chief: I finally got to read this post.
At $12,500 to keep my Drifters look and feel he drive to MN was well worth it. I have been getting more and more experience with the handling and the overall feel of the road. With that in mind I actually switched back to my Harley solo springer seat. The only thing that I have added is a Harley seat rail and vertical/raised seat back rest. It works for me.
I would suggest that you look up Endeavor Trikes website and give it a look. Norm is still taking bikes for conversion and does them from October to March. If you like what you see, pony up the cash and go north.
Sorry about there being no pics with post. I am still trying to figure out how to add them. If you want pics of the conversion send me a regular email and I send some back.
I haven't been on the forum for quite awhile. Health issues from last summer have limited everything. I have developed kidney failure and am on dialysis 3x week. Don't cry, I am handling it well.
Prior to the kidney thing I had been having concerns about my handling and riding skills. I just kept getting more and more concerned and riding less. I love my Drifter and didn't want to give it up or riding.
I knew that going to 3 wheels was was next, BUT I did not want to give up my Drifter and its styling. I wont ride a TriGlide or a 1/2 conversion. That left CanAms as the only option I could see, UNTIL, I found Endeavor Trikes up in Minnesota.
Endeavor is a one man shop that converts touring motorcycles in to Reverse 3 Wheelers. Its a patented process and for 12,500 dollars you get a great looking machine. You take your bike, give it to Norm and in about 8 weeks he will give you back a completely new experience.
I had my 99 Drifter converted last fall and have been learning to ride all over again and am now to the point that I am beginning to enjoy riding again.
If, for some reason, you feel the need for 3 wheels, give it a try.
To All: It has now been about 3 months since I got the trike back. I have managed to get just under 300 miles on it. It handles quite a bit different than 2 wheels but I am getting accustomed to it. There have been some changes made in what it looks like from the video.
Due to wind concerns I installed a 15 inch windshield from 7Jurock. Reverted back to frame mounted Corbin solo seat because it feels closer to bike movements. (Springs had a movement lag that was bothersome) And, strangely enough, I have added an (much modified) older Harley seat rail with the old 1950's/60's Banana pad. It adds to my feeling of being in touch with the movement/angle of the bike now that it no longer leans.
Once I got used to the 3 wheel setup I have begun to appreciate its handling capabilities. No longer tied to the basic premise of putting my feet down at stops or remembering to put down the kickstand is a nice thought. At this point I am starting to look forward to much longer rides. May even attempt another Iron Butt Saddle Sore 1000. Did my first one back in 2020 on this bike as a two wheeler. Might do it again as a 3 wheeler. Riding is becoming much more fun again!
Will post more recent pics soon.
Yes, we are a few and far between group. I am lucky, here in Kansas I have 2 Drifters of my own, and have two friends here in town (Fort Scott, KS) that own Drifter 1500's. Plus, we have 2 1500's that are works in progress. However, we do agree that Drifters in the wild are rare. Saw one in 2015 about 25 miles away, but it has since been sold. One of mine will be departing to my son this spring and the other I have converted to a Reverse Trike. But, yes we still ride and we still love to and live to ride
That email would be great.... I am getting more confidence on every ride. On Thursday, Jan 11 the temp got to 52 degrees just before the bottom dropped out. I managed to get a short ride in and got up to 78 mph on the local highway...Speed limit 75. My curve handling has gotten better and my body is reacting better to the new feelings being sent from the bike. I did switch back to the OEM solo seat. It seems to help with body stability. The springers didn't relay messages to my derriere fast enough. Lag time with springs.
To All: I got Jewell home in Mid December and have only been able to do a couple of short rides due to the weather. At this point I am the one in the "learning curve". Since I have only ridden 2 wheels since I was 10 that curve is kind of steep getting used to how 3 wheels work. All in all I would say it really works well.
Does anyone have a good email for Denny Berg? I really would like to send some pics to him.
He and I met at Drift In 2010 and our bikes were set up the same all except leather cover.
Ok, Drifter people, its official. My 1999 1500 Drifter (aka) Jewell is now a Reverse Trike. The work was done by Endeavor Trikes of New Prague, MN. The outcome is absolutely beautiful. Here is a YouTube of the final bit.
OK,
I need to know from the forum what size and brand of car tire works the best on the rear wheel of the Drifter 1500.
I am having my 1500 converted to 2 in front, 1 rear. The guy doing the conversion says he cant put a car tire on that bike rim and the only thing that would fit would be little spare.
My buddy, Parson Dav went to the dark side with his 1500 a few years back and had a Chinese tire on the rear. It worked for him with only marginal cornering issues.
I will not have that issue as I am going to be straight up all the time.
So, I want to know from anyone who has done the dark side, what size, brand of tires work
Right now I get to keep the rear tire on mine, but I know its not gonna last 30,000 miles
Take a picture of the number and where it is. If its on top of the risers it is the last 4 of the VIN. That piece was special and only put on AFTER the bike was purchased. The original owners got a presentation packet that contained the piece and a certificate of ownership. The owner could have his moniker put on it too. I have the plate for my 99, Jewell. It says Big Chief and #0105. Send us the pics.
Well, my Jewell has been in MN for about 2 weeks. Norm at Endeavor just posted on YouTube about his new build season starting and I got to see my bike from over 500 miles away. In the video he said that he will crack into it this coming week. Just for you guys I left him the Drifter maintenance manual in case of problems.
PS: Has anyone noticed that the aftermarket OEM style front turn signals have separation issue? Both mine gave out on the way to MN 2 weeks ago. Turns out the rubber dries out and separated from the steel core. They were just dangling when I got there. Norm used 3M 08115 body stuff on them to put em back on.
Those parts are at least 17 years old and stay in warehouses until we buy them.
Addendum: Jewell has been up at Endeavor Trikes for one month. Norm, the owner and only employee, shot 1 video last week with plans for the build and today, Oct 29, he posted another and he is well on his way to making Jewell a trike! With luck, I will be able to get him back at the end of November or beginning of December. I will post pics here as soon as I can.
Addendum#2: Another video has been posted by Endeavor Trikes. The build has gotten so far as to have all the bodywork completed and will probably go in to paint on Nov 6. He is working hard to keep the Drifter styling with the valanced front fenders and although they aren't quite as full as the single OEM fender. Overall, its looking very good. Check it out.
Addendum #3: Jewell is fast on his way to being a trike. New video shot Wednesday show him with 2 front wheels and all the running gear in place. Norm says that the bodywork will go to paint on Fri, Nov. 3. If all goes well he should be complete by the middle of November. I am keeping the original Gooseberry paint and trim scheme. My bikes triple tree was signed at Drift-In 2010 by Denny Berg himself, THE CREATOR so I think it should stay in the original paint. My VIN is 0105, a low number and t came off the line December 1998 for those who care about age.
Addendum #4: Jewell is not back yet. However, he is now roadworthy and tested. Issue is with painter and his timing. The new painter is in a body shop with priorities on jobs. My Drifter is a secondary job. I have been informed that paint should be done prior to Thanksgiving. That said, I am not holding my breath. Overall,, the job looks pretty good and I am pleased with what's happening.
Addendum #5: The conversion is complete. Looks awesome. Will be getting Jewell this weekend 8-10 December. The styling is right on the money.
This is for all of you out there who are getting long in the tooth and short on Balance. I have found a guy in New Prague, MN who does conversions to bigger bikes. Its Endeavor Trikes....Look em up. He has been in business about 9 years and its a patented process. The end result is 2 in front 1 in the rear, like the Can Am Spyders. The cost is 12,500 for the whole thing. You take the bike up there.
I am having my 99 converted in Oct-Dec. I will post pics when its done.
I am getting ready to give my 2000 1500 "Gracie" to my son as I am having my 99 "Jewell" converted to a 3 wheeler like a Can Am Spyder. The conversion is going to be down by Endeavor Trikes in Prague, MN. The conversion will include front fenders with Drifter body styling....Won't give that up.
Anyway, to get Gracie ready, I need to convert her back to the stock 2up seat. BUT the OEM seat grab rail interferes with the install and use of saddlebags.
My riding partner, Parson Dav has a good set up with a backrest, luggage rack AND grab rails that don't interfere with saddlebags. I dont know if the attachment bracket is Fire and Steel, but the luggage rack and sissy bar are.
See picture
Does anybody here on the Forum know of a setup like this that might be for sale?
OK, gang, here's the deal. This is put out there for anyone interested in a decent little pull behind trailer. A company called Neosho Fiberglass in Neosho, MO had to shut down due to the owner passing and the economy. They sold trailers under the name "Starlight".
Since they are no longer listed as a company and are no longer producing, they are left with a snit load of parts AND some completed trailers. Right now they have 8 completed trailers that they call the Model 16, a cute little 16 cu. ft. job that is just right for short trips and beginners. They are in white and black, so you will have to adjust the paint yourself.
If you know of someone who has a Starlight and needs parts for repairs, they still have plenty of other stuff left like hitch topngues, rotating trailer hitches, some tires, and some accessories. They also have some fiberglass tubs, and lots of small parts too. They have alot of 2nds in the way of their cooler holders too.
Prices range from about 725 in the basement to about 1200 for ones with more accessories. And since they cannot make any new ones, they need to get this stuff sold off, so please look into this and help them get out from under this.
The number is 417-451-0699. They are open Wednesday thru Friday. When you call they will answer the phone DJM Associates. If someone does call, Tell them Scott from Fort Scott sent you.
PS: I have attached the sales flyer so you can get an idea of what they look like. Reminder, all thats left are the Model 16s but they have lots of accessories too. They are selling this stuff at about 1/2 price.[url="https://www.vulcandrifterriders.com/forum/index.php?action=dlattach;attach=27650;type=preview;file"]Brochure Complete[345].pdf[/url]
To be honest, I never knew about pulling in the clutch lever as it has always started in Neutral, Switch On, Push button. When I looked at the parts lists online, I noticed that there are 2 p/n listed for the switch unit.
Since my 1st post I have obtained a used switch that is plainly marked as being off of a 99 1500J Drifter. Haven't put it on yet but will compare with the original from my bike to compare the pin configurations. If they are the same I will get it installed.
Addendum to this post: I did get a good look at the pin/connectors in the new one I just bought and the old one that was removed. The posts are in the same positions. When I have the other switch removed I can look at the connections and compare.
This is a much much belated post. I met RatMan in Pikeville and it was him that gave me the moniker Cuz'n Vinnie at the last dinner we had. I respected him for his humor and his toughness and tenderness. As a matter of fact, my wife still invokes his name when I ride. Nuff said... See ya in the here after, Canuck,
NICE Indian...LOL
Does it have the original switchbox or has it been replaced?
Page created in 0.112 seconds with 15 queries.