Yep. it was the damn Power commander removed it,,,and ran great,,,no issues.
GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuYep. it was the damn Power commander removed it,,,and ran great,,,no issues.
I put a new old stock power commander on my 02. Goes like hell. BUT, I keep burning up [3 so far] the TPS Anybody else ever have this issue? Any solutions??
I actually just found a brand new one still in box with the CD and programmer cord....for a Hundred bucks,,,,,,Score!!
LOL thats actually what i planned next. Can't start till daylight. Too loud ;]
My wifes 99 1500.
It has no power on the yellow wire with white stripe. Everything else works. Have checked all fuses twice and replaced relays from my 02 1500. Even replaced the ECU with the one from my bike. Got not power to TPS. No power to Power commander 3.
Recently replaced the TPS as it was defective. Ran great for about 3 miles. It Shut off and will not fire the injectors. Tried spraying gas in intake...it runs. It appears I'm losing power to my injectors. Any clues???
also take an old Harley saddlebag bracket...bend it like the photo above and add a roll bag for storage
Just find an old Harley seat...cut off the passenger pillion and roll the leather/vinyl over the back and pop rivet it. cut two 'channels' for the frame ears. Use fiberglass gel to cover holes. [not necessary as water will never get that high. and if it does,,,you got bigger problems as you just rode into a lake,,,not good] you can buy cheap seat at any bike swap meet or ebay etc..
I got one of those 'Jumper/airpump' thingys at a yard sale. The battery part was useless as the battery was far too old. But the pump worked fine. So in my usual gonna make something outta this thinking,,,, I mounted it in the left side 'Glovebox' It still has the built in pressure gauge attached. Used an old junk battery tender connector to hook it up when needed. Now I just pop=out the removable shelf....plug it in ...and fix mine or anybody elses low or flat tire problem. all for about 5 bucks from yard sales!!!
Yep. For damn sure. I have never taken as many showers in the last 20 years as I have since I got here.
I just recently moved from PHX AZ to Port Richey FL. Any Floridian Drifters want help fixing, modifying or riding freinds. Let me know.
Sounds like your shaft drive is acting up. Could be worn gear or u joint..
OR.
It could be your significant other whining your riding. Hide her shoes. The whine will disappear sooner 
I think as long as you left the frame black, it would look good. Anything other would be just 'too much'
Without removing the goat bladder, I doubt you
will notice any real difference.
I just painted my fenders with Alsa 'chrome' paint. I think it looks great. It's not exactly chrome, more like highly polished aluminum. I think it gives it a Brough superior or Vincent kind of vibe to it. Haven't yet done the tank as it came with a medallion dent from the previous owner. this 'Paint is so sensitive that a fingernail scrape shows through. So . I have to sand , recheck and check again before I paint.
I have used this pump on a few bikes, no issues at all. even after 5 tears of hot hard AZ riding/
If the battery's hot you have a draw somewhere
I defer to your Expertise. And thanks for the education. Even Old farts can still learn.
I have never experienced any issue with a simple exhaust change on several Drifters I work on, maintain or own. The computer does have the ability to richen or lean even without the Lam sensor.
Which is why stock Drifters run well from sea level on up to the mountains. And yes they are programmed to run a bit rich like Troll pointed out. If you can afford a Power-commander than by all means get one. But riding with the stock one has never caused any problems with valves etc. and if your planning to get one but have to wait a bit for whatever reason. It will not stop you from enjoying your bike in the meantime. Just my humble opinion.
No, the stock computer will add more fuel as needed.
If no other changes..Intake etc. Then no, your stock computer will adapt just fine.
QUIET? Yes fairly quiet, yet louder than stock as the goat bladder actually does a significant amount of quieting. and removal with raise sound.
Damn AZ Heat!!! Shrunk my Bike!
Look up 'Another seat modified ' in the forum search for an easy seat change.
Page created in 0.115 seconds with 14 queries.