What is the correct replacement for the Driifte rectifier?
We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuWhat is the correct replacement for the Driifte rectifier?
I have to admit that I see more Drifters for sale here in the states then when I tried to buy mine five years ago. Back then it seemed like if you had one, you kept it. Now I see more guys "moving on". I have to admit any parts specific to the Drifter are tough to find. Fortunately I haven't needed to to replace much on the bike. That day may come. But, for now she is my one and only sweat ride.
After riding Triumphs for years, I finally bought my 1500. I've ridden 800 and did not see that much difference in close quarter riding. When and if you do go highway riding the difference is significant. For me , the 130 pounds difference means a lot when it comes to stability on the road plus having a little more hp and a lot more low end torque makes it an easy ride even in the city.
Painted a buddied Norton with Colorite. I think is was DuPont paint. Good paint but the cost is crazy.
I have 23K on my 99er. What you should look for? Look forward to a sweet ride whether you are on the back roads or cruising the interstate.
Check thisOut. https://itstillruns.com/remove-baffles-cobra-pipes-5044275.html
Sounds easy and you can replace them if you want.
I had to have one! I never knew they existed until I saw this commercial on YouTube
I'm an older guy. I like older bikes. After riding a bunch of "classics" I got tired of all the "Wrench and Ride" business so like I said, I saw the Drifter ad and everything the ad mentioned made sense to me. Its a classic looking bike but built on a modern platform.
It took me better than five years to find my '99er. I live in Wisconsin (read: Harley country) I found the bike on Craigslist across the lake in Michigan. My nephew happened to lived near by so I asked to check it out. It was the real deal. Bone stock with pretty much every Fire & Ice option originally available and only 10 grand on the clock.
I quickly sold my TBS, hopped on the Lakeland Express and bought the bike. I rode it for the first time and knew it was meant to be. I ferried it back on the boat. I was late October so I only road it for a couple of days that fall. I have doubled the millage since then. Sweet bike. And now they are saying it is a cult classic. Fine by me.
What's your story?
Thanks for the info.
Need to replace the inner seal on the clutch pushrod. (leaking down my kickstand) Anybody happen to know the part number for the seal?
Need a new throttle cable for my 1999 1500. Trouble finding a listing online. Does a cable from a 1500 classic work on this bike?
The earlier comments at well put. The 1500 is a solid road bike. I went from a 900 to a 1500. They are dramatically different bikes. I loved to toss the 900 around on the back roads but riding the interstate was a pain. I thought getting the 1500 would put an end to my back road fun. Not the case. the 1500 is as nimble on the back roads as anyone would want. Sure, I scrap a running board or two once in a while. The weight and the torque keep the bike on the road and moving well through the twistys and it's a dream on the open road.
I know this is an old post but here is my two cents worth. I always like the look of the Drifter. I finally found one for sale. It was a robins egg blue 800. Loved the ride. It was a great bike to toss around the back roads. However, it's not a cruiser. Keeping up with interstate traffic was though. So I waited and hunted for the next four years and finally found my '99 1500. Never looked back. I loved the clean look of the 800 but with a set of bags, who can tell the difference. I still toss it around on the back roads plus I ride the interstate with the best of them.
Mine seem to kick off to the right on low beam......or......they kick of to the left on high beam.
Welcome! The first Drifter I rode was baby blue 800. Loved the bike (not the color) Has to have one. I went through the same quandary as to which one to but 800 or 1500. Love the look of the 800 without the ugly shock mount but chains and carbs threw me off so I bought a 1500 with a great pair of old weathered leather saddlebags. Can't see the shocks anyway so no chains and no carbs for me. I never look back (except when someone is chasing me)
I agree you MUST keep the skirted fenders otherwise it will be like Jennifer Grey's nose job, it will just look like everyone else's. And as long as you are keeping the fenders, IMO they MUST be painted two tone. Pick your colors but paint'm two tone
R.I.P Ratman. You will be missed.
just be aware that the wheel travel specs and the fender travel specs are different. The wheel travel is based on up and down dimensions. However the fender pivots on the rear control arm which actually means that the rear part of the fender travels further than the wheel. ( I have the gouges in my fender to prove my miscalculation) Bottom line it fender travel closest to the set is less than at the fender tip. This is important when considering the hight of a luggage rack. Tip: If you have a two-up seat, measure the clearance at the far end of the seat. That is a safe way to insure you have enough fender clearance.
Quote from: Bucko on February 17, 2018, 20:41:11 PMDays must be longer in your neck of the woods.
![]()
Plus you guys are on metric time so the day may be longer.
Hey, I might even try to make the trip up nort for this one. I'm only two states and an another country away. You guys still driven the left side of the road?
I must be either lucky or dense because I rarely feel any buffeting on my 99'er. I need the lowers otherwise the wind blows my mustache up into my nose and it gets tangled up with my nose hairs.
I keep mine lubed up. Had it bind once out on the road. I could live without the lock.
Looks good. I had a similar problem on my Road House pipes. They were originally for a Vulcan Voyager so I had to make my own brackets. Mine needed a bracket up front for both the pipe and an extra heat shield pad since the pipe came too close to the running board. Mine have the old flex pip covers. Love the look.
Quote from: rob f on January 14, 2018, 09:15:09 AMI am sure you can stiffen up the rear suspension however at some point it will effect your ride. Stiffening the ride will not effect the suspension travel under extreme conditions. Might be best to deal with the limitations as they exist. At one time there were Drifter luggage racks available for sale. Might want to find some photos to get ideas.jmbo, can this cantilever motion be dampened by tightening up the shock? I see that there is an adjustment of some kind but not sure how effective it is. is there an aftermarket air shock available?
R
Great video. Back to the original issue. ender travel is the issue when it comes to anything hanging out braid the seat on a Drifter. Since the fenders are plastic, a miscalculation can do some damage. The specs on Drifter are supposed to indicate the travel limits on the rear suspension. I can personally attest for the fact that my 250lb butt sitting on a moving Drifter while it bottoms out on a unsuspectingly fought set of rail road tracks greatly exceeds the Drifter spec.
That said, the stock cantilevered two-up seat seems to clear the fender under even the most sever conditions. Copy thoe dimensions and you should be in good shape.
One final comment: Few of us get to see how our own bikes look going down the road. Truth is we look pretty funny. One of my friends described it as well as any. "You look like and inch worm going down the road" Other said you bike looks like "It is broke in the middle" One day I followed another Drifter on a bumpy road. They were right.
Page created in 0.116 seconds with 14 queries.