Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - aralph

#1
Canada / Re: Ratman
October 13, 2018, 20:30:12 PM

Haven't been around here in a while. Just received an email about Andy.
Had the pleasure of meeting him once as he passed through Windsor on the
way to Drift'in. Went for dinner and talk for hours. It was like being with an old
friend you know for years.

My friend, you will definitely be missed and never forgotten....

aralph

#2
2017 / Re: 2017 Northern Drifter Rendezvous
November 12, 2017, 17:53:17 PM

Awesome job Andy. And the video was wonderful to watch.

aralph

#3
Drifter 800 Only / Re: dead battery
July 17, 2017, 22:09:14 PM

Hi Frank, battery can show fully charged but still not be able to take a load such as starting the bike.
Pull it again and take it to your local auto parts store and they should be able to test it properly with a load tester.
If it is good then make sure both connections are clean and tight and then  the first thing to check is the frame ground at the
other end of the negative cable. If this is loose your battery will not get a charge also. If it is tight also then you move on to
look somewhere else. Hopefully it's that simple.

aralph

#4

Oh sure, everything south of NorthBay, right...lol

Yes, all moved in. Going to take awhile to settle in though.
Still a lot going on. Granddaughter arriving in 6 weeks. Have to get her room ready.
Off to Dominican republic in 2 weeks. I need this one after this move. It was rough.
Managed to get your request done. Will try to get it shipped up before my vacation.

Have a Happy New year
aralph

#5

Welcome Newby. I'm down here in Windsor area.
Where you at?
Stange group here, but a good bunch of people.   :o
Lots of good info and definitely entertaining at times.

Ride safe aralph

#6
Quote from: CDNRatMan on July 06, 2016, 12:21:55 PM

The last" Biker Reunion" to be held.

You mean, that's it , no more New Liskeard?

aralph

#7
Introductions / Re: Old Newbie from MI
June 14, 2016, 16:52:51 PM

Welcome and nice looking ride, kind of biased though.
Quirky group here, but they all get along for the most part.... :D
I'm just across the creek.  Was over on Sunday. Went out to Zukey Lake Tavern in Pinckney.
Was a nice ride and great food.

aralph

#8
Drifter 1500 only / Re: New Corbin Solo Install
May 16, 2016, 22:36:12 PM

Factory saddlebag and setup will not work with this seat.
Probably have to modify stuff to make things work.
Check out the link. Look under Notes.

http://corbin.com/kawasaki/drift_dt.shtml

aralph

#9
Drifter 800 Only / Re: HELP with oil screw!!!
April 23, 2016, 16:12:01 PM

Like Ratman says ,use a piece of flat stock that fits the whole slot. it needs to be the same width of the slot to apply pressure along the edge. Or try to find a drag link socket . Someone probably tightened it down dry with no oil on the rubber gasket. Same mistake people make with oil filters.

http://www.core77.com/posts/24121/Tool-Terminology-A-Drag-Link-Socket-is-a-Large-Hollow-Ground-Screwdriver-Bit

aralph

#10
Drifter 800 Only / Re: New Floorboard Trim
March 26, 2016, 20:15:43 PM
Quote from: CDNRatMan on March 26, 2016, 18:54:06 PM

Well the original use of the fringe was originally a functional detail, to allow the garment to shed rain, and to dry faster when wet because the fringe acted as a series of wicks to disperse the water

Going to start calling you  "Cliff Clavin" if you keep this up...

aralph
#11
Drifter 1500 only / Re: bent shifter fork
February 18, 2016, 18:01:45 PM

Again thanks...

aralph

#12
Drifter 1500 only / Re: bent shifter fork
February 17, 2016, 19:01:44 PM
Quote from: Troll on February 16, 2016, 08:33:08 AM

You should have them put in a new clutch spring while they're in there..it's like $18...easy enough to do while it's all apart

Thanks, didn't think of that. Thought I read somewhere about using
springs from a Meanstreak cause they are heavier. Yes or no?

aralph

#13
Drifter 1500 only / Re: bent shifter fork
February 12, 2016, 17:49:00 PM

As much as I would have like to tackle this job myself, I don't have a garage to do it in.
Took the bike up the highway to the good people at Hudson's in Tilbury.
Brought the bike up in Nov. and they finally were able to start on it this week.
All parts are available and being ordered Monday. So it should be back together
long before riding season starts.

As for the bike show, that weekend already booked up.
Enjoy the show, I'm sure you will post some pics for us.

aralph

#14
Drifter 1500 only / Re: bent shifter fork
February 11, 2016, 21:35:27 PM

Well complete tear down is under way.
Wow there is a lot of pieces in there
Bent shift fork and a couple of bad gears.
New piston rings and cam chains also.
Plus 2 new whitewall tires.

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

aralph

#15
General Discussion / Re: Bike Show pictures
January 11, 2016, 20:59:47 PM

By the sounds of it I missed you by a day.
Went there on Saturday. A friggin zoo. Wall to wall people and over an
hour to get into the parking lot and find a spot.
Sure they had some interesting things to see, but I don't understand the
$20.00 door charge to basicly  go shopping.
Cross that one off my bucket list...

aralph

#16
General Discussion / Re: Question for PC again
December 28, 2015, 13:52:18 PM
Quote from: CDNRatMan on December 27, 2015, 12:54:58 PM

aralph you know that cause you swim in the river and have all the US stuff right next door........

Yes it's not safe living so close to the Dark Side...
#17
General Discussion / Re: Question for PC again
December 27, 2015, 09:57:59 AM

RatMan, if you use these adhesive strips  just stay out of California and
definitely DO NOT reproduce....

aralph

#18
Drifter 1500 only / Re: 800 or 1500
November 10, 2015, 19:15:30 PM

Hey Kevin, welcome to the forum. I didn't start riding till my late 40's. My 1st bike
was a Suzuki 650 Savage. I had this for 1 season and then went right to a 1500 Drifter
with no problems. There is only about 130 lb weight difference between the 800 and 1500 Drifters.
There are also several other differences between the 2 bikes that you should consider.
But you have to feel comfortable on what ever you choose.

Ride safe
aralph

#19

Having the same problem with 2nd gear. Was told most likely worn dog or bent fork.
Yes, complete tear down. Thinking about an engine swap if I can find a good salvaged bike
for a reasonable price.

aralph

#20
Drifter 1500 only / Re: new engine for 1500
October 21, 2015, 16:41:05 PM
Quote from: pcarrell on October 20, 2015, 17:10:54 PM

A meanstreak engine would give you a hot rod.

6 extra hp, +12 N.m. of torque @ 2800 rpm.
Maybe on a lighter bike you might find a difference.
I would go with the Nomad engine.

aralph

#21
Drifter 1500 only / Re: bent shifter fork
September 18, 2015, 15:34:35 PM
Quote from: Troll on September 18, 2015, 09:18:25 AM

..This is a HUGE job!..

I had a feeling it would be. Thanks for responding.

aralph

#22
Drifter 1500 only / bent shifter fork
September 17, 2015, 20:08:20 PM

Having problems in 2nd gear only.
Under medium to hard throttle, transmission pops out of 2nd gear into neutral.
It's very consistent. Only under light acceleration will it not pop out.
My mechanic has suggested a bent shifter fork.
Troll, I read in a previous thread you had to change one. How much work does this involve?
Also any other possible reasons for this issue?

thanks
aralph

#23
Drifter 1500 only / Re: charging issues!
September 14, 2015, 21:22:59 PM

Just throwing this out there, but have you ever checked the frame ground
to make sure it is tight and clean.

aralph

#24
Quote from: CDNRatMan on July 27, 2015, 20:27:35 PM

all that distance I met another Canadian from Ontario...

Some of the nicest people you met I bet... ;D
#25
2015 / Re: Drift In 2015
July 24, 2015, 16:05:00 PM
Quote from: CDNRatMan on July 22, 2015, 23:03:52 PM

;)  got me a bike cover,

Quote from: Troll on July 24, 2015, 06:09:32 AM

There was a pair of mesh armored gloves there all week, and I managed to get them (and a few other goodies)

Quote from: CDNRatMan on July 23, 2015, 23:39:22 PM

of the 3 bikes in the 800 competition a really good looking Sunbeam Red too the first place award.

Good job RatMan, you represented Canada well.
Sounds like you have more to bring back with you then you took down.
Careful with those custom officers with all that loot. Don't wear those Minion
goggles crossing over, they will know somethings up.

aralph

SMF spam blocked by CleanTalk