My '99 1500 popped the fuel filter end of the high pressure clip fuel line .
Part does not seem available ; I can get the 24.5/7.89/7.95 clip/s ; but the rubber joiner hose and internal nylex may be more difficult . Does anyone have experience of fitting these hoses - at possibly 300lb pressure , I want to be sure I do it right .
Only alternative is a 2nd hand VN1500 post 1999 .
Will white vinegar , bolt rattle and bi-carb soda with final 2 stroke fuel wash to de-rust tank .
Will also check/de-rust tank-internal fuel pump .
Will reverse flow tank-external fuel filter .
I have searched and checked Maintenance section posts .
Any tips appreciated .
Many Thanks