I just bought this bike 2000 drifter1500 and it has a three-way switch with a keyhole in it below the speedo. I didn't get a key that fits it and I don't think it is a factory item. I also have no idea what it is for it does seem to do anything. The guy I bought it from didn't know either "he was selling it for a friend"
I may take things apart and try and figure it out but as of now, it's a mystery.
I am very new to motorcycles so if anyone knows it would be a big help.
afermarket ign. switch relocator kit. Uses a "harley" style switch. Apparently not connected. That's probably a good thing, as they often fail and leave you walking. Actually the switches, themselves don't fail, but a small resistor has to be added to the circuits to bypass the computer's anti theft system. If that part goes smoke, the fuel pump will not run.
Thank you for the help.
If I can chime in, I'll add that I did that mod to ma-deuce a few years ago.
And I'm very happy with it, because that avoid me to bend my poor back, on each starting, tryin' to insert the ignition key.
And it has never failed, so far...
Your 800 does not need the inline resistor that is required with the injected 1500. The switch doesn't fail, the extra wiring does
I think if I can find a cover plate stock or something cooler. I will remove it.
Standard Harley switch, easy and cheap enough to replace.
Can see why someone would do that, original ignition /choke is a pain.
Quote from: Troll on January 03, 2023, 13:31:28 PMYour 800 does not need the inline resistor that is required with the injected 1500. The switch doesn't fail, the extra wiring does
Sorry to have to prove you wrong, but I've had to put that inline resistor, too.
And it took me a lot, before understanding that was the only reason why I couldn't figure it out for the hell of it!
And for the extra wiring, I hope it won't fail, ever! ;)