Hello
When the engine is cold, a slight ticking sound is heard in the background, is this normal:
https://youtu.be/friJIyXZdTA
It's most likely a hydraulic lash adjuster (HLA) which is normal until warm-up.
Mine ticks a lot worse than that, hot or cold - has since new. One of these days I'm going to get in there and find out why.
so does mine.....after first having the 800 model which is very quiet, I was really concerned with the loud ticking that my 1500 makes at start up..especially when it has been sitting for a while. But I've gotten used to it..and with the stereo blasting, I don't even notice it anymore... ;)
Quote from: Old Drifter on March 22, 2020, 11:56:57 AM
It's most likely a hydraulic lash adjuster (HLA) which is normal until warm-up.
Yeah, I think so. It is then a normal procedure. :)
I had one HLA replaced when I had the dealer refresh the engine at 125,000 miles. So far, it's a lot quieter when it's cold, and damn near quiet when it's all warmed up...
Mine's been noisy since I've owned it, learned to live with it.
Then no worry about that :)
Quote from: RockinRollin on March 23, 2020, 19:54:58 PM
Mine's been noisy since I've owned it, learned to live with it.
How many years your bike make this HLA noise?
Hear is another video when engine is warm. Ticking noise little disappear but not all.
Is it dangerous to my bike motor?
https://youtu.be/mVGNyTPPS60
Sounds kinda normal to me, however it sounds like you may have an intermittent tick sound caused by an exhaust gasket at the head. Did you re-use the gaskets when you put the Silvertails on?
Quote from: Old Drifter on May 04, 2020, 10:47:30 AM
Sounds kinda normal to me, however it sounds like you may have an intermittent tick sound caused by an exhaust gasket at the head. Did you re-use the gaskets when you put the Silvertails on?
No there is a new gaskets in place. Also after driving when engine cooling, I check exhaust head connection bolts and I tighten these little more
but I check possibilties leaks tomorrow. What is the best method to check gasket leaks?
Quote from: moto on May 04, 2020, 03:00:04 AM
How many years your bike make this HLA noise?
Hear is another video when engine is warm. Ticking noise little disappear but not all.
Is it dangerous to my bike motor?
Wow. That's way, way quieter than mine.
I found one leak, between two exhaust pipe on the connection pipe.
the connecting pipe was not high enough to stick to the upper pipe and therefore a mill gap remained in it.
I lifted it onto the top tube to make the gap disappear.
Tomorrow I hear the sounds again.
Quote from: moto on May 04, 2020, 15:52:32 PM
I found one leak, between two exhaust pipe on the connection pipe.
the connecting pipe was not high enough to stick to the upper pipe and therefore a mill gap remained in it.
I lifted it onto the top tube to make the gap disappear.
Tomorrow I hear the sounds again.
I find a leaks a Silvertail exhaust combustion pipe. Its leak both ends.
Whether the exhaust sealing tape helps??
Aren't there any clamps on those joints? I really don't think hose clamps have the ability to seal a metal pipe joint...
Quote from: Troll on May 06, 2020, 07:44:42 AM
Aren't there any clamps on those joints? I really don't think hose clamps have the ability to seal a metal pipe joint...
you are right, these clamps are weak.
Gasket leaks - close the garage, so there's no other breeze & hold a burning incense stick next to the suspect spots.
Ticking - sounds like my 167,000K '99. Nothing to worry about. :)
Glad to hear that Drifter engine is so durable. So I dont worry about these ticking ;)