Ah -
So apparently all is not good ---- the fuse IG fuse continues to blow.
Everything on the fuse appears to be functioning correctly before and after the fuse blows - except for the Speedometer LED's.
Before I go digging into the electrical system, has anyone seen this before, and what might be the issues?
I know we have some great people out there, so Anyone?
Thanks in advance,
Phillip
Phil, sorry for no replies on this issue.... did you ever get it figured out?
Hi,
Thanks....
So, this issue became greater as having changed the fuse twice, it continued to blow.
This led to an issue wherein the bike wouldn't start. A key turn would light up the electronics and prime the bike, but on starting her up, you'd here a relay pop, and then dead... nothing until the relay would reset.
Checked some wiring and replaced all the relays- same thing.
As it is always the last thing you check, my mechanic checked the ground terminal on the bike - Voila! Cleaned it, and the bike starts right up. So far the Speedometer light remains on.
Just going through a few other things before I put her back on the road. It looks like there may be a need to replace the radiator cap, but I am going to post that on another thread.
Thanks again.
Good to hear that you have it figured out, and that it was relatively minor.
Unfortunately, not very often we can see the solution in front of us, as far as we're caught by hunger for the impossible...
Glad to know you have fixed the problem-
Now go ride your scoot!
Thanks for everything!