Vulcan Drifter Riders

DISCUSSIONS => Drifter 800 Only => Topic started by: Diddly squatt on March 15, 2016, 11:37:59 AM

Title: Oil Filter
Post by: Diddly squatt on March 15, 2016, 11:37:59 AM
I'm getting ready to change my oil and filter. The service manual says to use Kawasaki silicon sealant and put grease on the gasket.  I've always just applied oil to filter gaskets and tightened down. Do you guys use this silicon sealant? Thanks for your help, Mike
Title: Re: Oil Filter
Post by: Trall on March 15, 2016, 11:53:50 AM
No silicone, just like you and any filter just wipe seal with oil and go.  I did mine a few weeks ago no issues no leaks.  Drain oil change filter add 4 qts and your all set ;D
Title: Re: Oil Filter
Post by: Tfrank59 on March 15, 2016, 12:10:45 PM
No, I wouldn't use anything but oil, like you said.  Last time I changed mine on the Drifter, it did leak just a tad, until I tightened it again after like an hour of service.  I guess wait until it's hot and retighten, and after that it shouldn't leak. That's just my experience--some guys will say theirs never leaks period.
Title: Re: Oil Filter
Post by: CDNRatMan on March 15, 2016, 12:41:02 PM
 8) I'll be that guy, I have (touch (touching my head) wood) had mine leak. I take the bike for a nice short ride to get it nice and warm, level are in the driveway, on the side stand, remove the plug on the side to remove the screen, let it drain, then remove the drain plug under the bottom, remove the filter, then go and sit down and relax for a bit and wait for it to drip and drain all the oil.
Then I go back and wipe down everything and clean it all up, replace all the plugs and screen, then I use a bit of the pil drained to lube the "O" ring on the filter and spin it on by hand, and tighten it by hand, then with my wrench a quarter turn and done.
Title: Re: Oil Filter
Post by: Diddly squatt on March 15, 2016, 12:46:26 PM
Thanks for all the good information. Mike
Title: Re: Oil Filter
Post by: pcarrell on March 15, 2016, 17:12:49 PM
BTW, an old leather belt makes a great oil filter wrench that will fit into all sorts of tough to reach places.
Title: Re: Oil Filter
Post by: Hoggy on March 15, 2016, 20:38:20 PM
Quote from: pcarrell on March 15, 2016, 17:12:49 PM
BTW, an old leather belt makes a great oil filter wrench that will fit into all sorts of tough to reach places.

Oh that's what I did wrong.  I was using suspenders.
Title: Re: Oil Filter
Post by: CDNRatMan on March 15, 2016, 21:23:11 PM
   ;) PC knows a lot of old things.......
Title: Re: Oil Filter
Post by: pcarrell on March 15, 2016, 23:33:17 PM
Quote from: Hoggy on March 15, 2016, 20:38:20 PM
Oh that's what I did wrong.  I was using suspenders.

Too stretchy!
Title: Re: Oil Filter
Post by: Diddly squatt on March 16, 2016, 08:59:53 AM
I tried the leather belt method and my pants fell down; but I got the filter off.
Title: Re: Oil Filter
Post by: pcarrell on March 16, 2016, 10:10:43 AM
Quote from: Diddly squatt on March 16, 2016, 08:59:53 AM
I tried the leather belt method and my pants fell down; but I got the filter off.

See, you got the filter off, and NOBODY bothered you!  WIN, WIN!