Vulcan Drifter Riders

DISCUSSIONS => Drifter 1500 only => Topic started by: John Hopkins on November 16, 2014, 09:23:07 AM

Title: V&H baffle removal
Post by: John Hopkins on November 16, 2014, 09:23:07 AM
Back in 2010 several people removed the baffles on their V&H pipes...

After parking beside a few Harleys with very loud exhausts I have sort of been toying with the idea of removing mine for a short while to see what difference it will make..

My bike is a 1999 model first registered in 2000 and I am wondering if removing the baffles will affect the performance and if so, in what way..

As I am the sort of person that soon loses interest in add on's and modifications I would like to be able to replace the baffles after removal..so any suggestions will be welcomed.

Thank you..

John.
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 16, 2014, 19:17:33 PM
I don't know if you will experience anything but improved performance. I took My baffles out of the V&H's on my '99, had them sandblasted, and never put them back. If you do pull them out make sure there are no holes in the end of your pipes facing the fender. I had that situation and quickly put in a couple of long bolts; to stop it from burning my fender and have something in the pipe if anyone wanted to check the depth.
Title: Re: V&H baffle removal
Post by: 49Reo on November 16, 2014, 20:11:06 PM
The longshots (and I expect most V&H pipes) have a screw holding the baffles in. Remove the screw, pull the baffle, and like Elmo say, plug the hole. It might lean it out a bit due to less restriction.
Title: Re: V&H baffle removal
Post by: moosewing3 on November 16, 2014, 21:35:06 PM
If anyone who has removed their baffles is interested in selling them let me know, I personally am finding my bike a little too loud without them.
Title: Re: V&H baffle removal
Post by: rawv on November 24, 2014, 04:33:09 AM
I ride a 99 Drifter with Vance and Hines Longshots ... I didn't like the sound I got after removing the baffles so I wraped half the baffle with fiberglass matt and then used tie wire to hold it don't use to much fiberglass or it won't go back into the pipe just acouple of wraps . 
Title: Re: V&H baffle removal
Post by: 49Reo on November 24, 2014, 10:46:42 AM
Moosewing, you can purchase the baffles for Vance and Hines at J&P Cycles; don't see a listing for the Longshots baffles but they have them for the Straightshots which are the same diameter pipes and mufflers as the Longshots. Of you contact V&H themselves they can give you the info you need; they may even sell them separately.
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 24, 2014, 14:17:48 PM
moosewing3, I'll sell you my longshot baffles if you are still interested.
Title: Re: V&H baffle removal
Post by: moosewing3 on November 24, 2014, 20:41:17 PM
How much you want Elmo?
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 24, 2014, 21:44:57 PM
How's $40 + shipping.
Title: Re: V&H baffle removal
Post by: moosewing3 on November 25, 2014, 19:22:15 PM
With shipping it actually works out cheaper to buy local here, thanks though!
Title: Re: V&H baffle removal
Post by: richaud on November 27, 2014, 09:01:38 AM
How much is shipping? I'm interested.

C
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 27, 2014, 16:24:34 PM
Where do you live?
Title: Re: V&H baffle removal
Post by: richaud on November 28, 2014, 03:33:40 AM
Got shipping adress i CA 90530 Torrance.

Cheers.

C
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 28, 2014, 10:59:06 AM
Richaud,
It's $16.28 to Torrance, CA 90503 (not 90530).
Title: Re: V&H baffle removal
Post by: richaud on November 28, 2014, 11:01:23 AM
Hi. Ok 56 usd shipped.  Ok for me. Just to make shure.. for The longshots right?  Is PayPal OK?
Title: Re: V&H baffle removal
Post by: Elmo Hayride on November 28, 2014, 14:08:29 PM
Yes, 56, correct. Please PM me your email and shipping info so I can shoot you an invoice.