After cleaning the area around the front sprocket it's obvious the previous owner didn't care much about chain tension... :(
laters
Bobster
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi1108.photobucket.com%2Falbums%2Fh411%2FRund_Funken%2F005kopia_zps1c5599f4.jpg&hash=2d00db0b5dd395c032906dbdc07353e9b6d1961f)
I think you are missing some sort of a spacer or something there, I can not find it on ron ayers right now but I seem to remember a rubber pad in that area......
You should see the inside of the average chain drive Harley in that area...Chewed through into the primary case, below the starter.
Quote from: Troll on June 23, 2014, 16:18:19 PM
You should see the inside of the average chain drive Harley in that area...Chewed through into the primary case, below the starter.
So that's why they went to belt-drive! ;D
RatMan, you're right, a rubber"thing" is supposed to be there, I just removed it when cleaning.
BTW, that "bar" that goes around the front of your front fender, where did You find that, and what's it called? Looks good. :)
Think I'm gonna put a piece of nylon or similar stuff where the chain has been grinding off the aluminum.
laters
Bobster
Ok so I was not just thinking it, living in Sweden you should be able to find something that would be a long lasting slider for that location, like runners off of a ice shack.
the Front Fender Guard, I personally think it adds that touch of old school nostalgia to the bike, thank you. I got mine from Ledrie before they closed up, but check this place out
http://www.customcruisers.com/Custom2005/customshop2005/contents/en-uk/p2421.html
or try and get in touch with a guy on e bay named motorsloop in Belgium.
Thanks for the links, RatMan!
laters
Bobster