Vulcan Drifter Riders

DISCUSSIONS => Drifter 1500 only => Topic started by: John Hopkins on June 26, 2013, 18:46:29 PM

Title: 1500 shock absorber settings
Post by: John Hopkins on June 26, 2013, 18:46:29 PM
I weigh about 226lbs..can anyone advise me what I should set my rear shocks at, preload, rebound and pressure..

at the moment I feel every pothole..

Thanks,

John.
Title: Re: 1500 shock absorber settings
Post by: Troll on June 26, 2013, 19:25:12 PM
Sooooo...16.14285714285714 stone huh? About the same as me. I have 30 psi (206.84271 Kpa). I have the rebound damping set at 4 to help control shaft jack and try to prevent the rear from rising too much in a hard stop. It rides ok, not as well as my TourGlide, but it doesn't weigh as much, and the angle on the shocks has an effect on their compression rates. The FLT rear shock units are straight up and down with softer initial spring rates. 
Title: Re: 1500 shock absorber settings
Post by: CDNRatMan on June 26, 2013, 20:30:17 PM
FEATHERWEIGHTS........
Title: Re: 1500 shock absorber settings
Post by: John Hopkins on June 27, 2013, 05:39:15 AM
Quote from: Troll on June 26, 2013, 19:25:12 PM
Sooooo...16.14285714285714 stone huh? About the same as me. I have 30 psi (206.84271 Kpa). I have the rebound damping set at 4 to help control shaft jack and try to prevent the rear from rising too much in a hard stop. It rides ok, not as well as my TourGlide, but it doesn't weigh as much, and the angle on the shocks has an effect on their compression rates. The FLT rear shock units are straight up and down with softer initial spring rates.

Thanks Troll...I didn't realise you colonials spoke 'stones'..I spent some time converting from stones to lbs so you would understand me..for europeans I have to convert to Kgs which are a whole new world for me..

Anyway, that's just what I wanted to know..

John.
Title: Re: 1500 shock absorber settings
Post by: DC on June 27, 2013, 07:22:53 AM
Quote from: CDNRatMan on June 26, 2013, 20:30:17 PM
FEATHERWEIGHTS........

I guess many of us are in the "featherweight" category.   ;)   ;D
Title: Re: 1500 shock absorber settings
Post by: Troll on June 27, 2013, 07:30:25 AM
Just wanted to make sure I could bridge the language gap....Communication is SO important...I have trouble understanding my neighbors down the block.. They are from Chicago.
Title: Re: 1500 shock absorber settings
Post by: CDNRatMan on June 27, 2013, 09:16:54 AM
  Hey DC want to see something else funny, almost all the people on this forum are in the over ..well over 40 age group....good thing they do not mind being old....lol......just check out the birthday thingy on the bottom. Think myself and D1 are the babies on the forum....
Title: Re: 1500 shock absorber settings
Post by: DC on June 27, 2013, 11:29:21 AM
That's too funny!   ;D  We're a geriatric riders site.  Next thing you know, someone will make a video of themselves inching their way to their bike using a walker.   ;D
Title: Re: 1500 shock absorber settings
Post by: nhtrikes on June 27, 2013, 11:39:33 AM
Played around with my settings as well for the first few rides. I'm 215, ?apparently another featherweight?,  and settled on 30psi with damp. at 3, go to 4 when carrying passenger, not very often. Very comfortable over most frost heaves, rr tracks and potholes. There is always that one that doesn't look like it's going to be bad and wump, it gets you!

I think all your rain has come East Troll. Been raining here for 6 days and expecting another 2-3 inches by tomorrow morning. I keep dumping water out of my pool and it keeps filling up. Frogs in the backyard brook are loving it, singing every night.
Title: Re: 1500 shock absorber settings
Post by: Troll on June 27, 2013, 11:48:36 AM
The weather channel says the next 7 days are going to be dry...about time. The River is still just (inches) below flood stage..This is usually back to normal depth by late April...still having flood warnings south of here...
Title: Re: 1500 shock absorber settings
Post by: CDNRatMan on June 27, 2013, 13:06:00 PM
nhtrikes come on up north here and I'll show you a few frost heaves that would bottom out your shocks.
Title: Re: 1500 shock absorber settings
Post by: nhtrikes on June 27, 2013, 15:02:43 PM
Yea, most of the real bad ones here are gone by end of April. March is a whole different story! By the time I take my bike out the roads have settled back down. I do hate those bone rattling heaves!
Title: Re: 1500 shock absorber settings
Post by: CDNRatMan on June 27, 2013, 17:37:40 PM
  at least your go away ours stay all summer short.
Title: Re: 1500 shock absorber settings
Post by: John Hopkins on June 29, 2013, 11:11:39 AM
Just a little update, I called in at my local bike shop because I haven't got an adjustment tool for my shock absorbers, the owner came out and adjusted my shocks for me and wouldn't take a penny..

John.