Vulcan Drifter Riders

DISCUSSIONS => Drifter 800 Only => Topic started by: Boaski on May 21, 2013, 16:50:03 PM

Title: Adventures in Saddlebags
Post by: Boaski on May 21, 2013, 16:50:03 PM
A year and a half ago I purchased a 2000 Drifter from a guy that posted on here.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0129.jpg&hash=51902bbfdad4c71d88a174dca24df1bf2aad8757)

Since it was winter I decided to do a few things to it, like having some pin striping and putting a set of fish tail pipes on that Joe (the previous owner) had.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F145.jpg&hash=0cf28ac7a7c681d859bf9cfeca964f51a5236e3f)

Once I did this stuff the saddle bag brackets that Joe had made did not work any more.

Shortly there after my wife suggested there needed to be a passenger seat for the required trips to go get ice cream.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F146.jpg&hash=ff64c6307e13e943f415178d3d09e840fecf28d8)

I never liked the way the bike looked with the 2 up seat, never liked the way it felt either. The bike just didn't seem to do well with 2 people on it and it wasn't very comfortable for the wife either. So I decided that I'd put the single seat back on it while I had things apart for new rear rubber. I also knew I wanted to figure out a way to hang the saddlebags on it again. My goal was to make a bracket that would be convertible between a removable passenger seat and a luggage rack.

Here's my current "Rev B" saddle bag mounts:

I did some test layouts until I found a location that the bags did not contact the pipes or the seat. I tend to over-build things & this project is no exception. I made the main plates out of 13 gauge (.090") CRS:
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F001_zpsec174952.jpg&hash=f9170b9907da83296f8f6ef1a4b4a9597f5e9c2e)

I knew I needed to space them out similar to the stock 2 up seat bracket so I found a hunk of 3/4" A36. It's handy to have access to a waterjet cutter...
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F003_zpsb51a20ce.jpg&hash=71d247269411d4c4d5c3c6b59d33c4c2f6a3fe03)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F002_zpsad488c23.jpg&hash=baace7699e16f9233aba695312ad1d2369ed02e4)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F004_zps1a72bdea.jpg&hash=43a89856629a75654aab2fb9dc64697d55ca8ab7)

Yeah, I know, maybe a little heavy.

These parts filled the void at the front of the brackets as well as spaced the brackets out.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F006_zpsb57bbb5b.jpg&hash=ff689e0223db11bab6d530669bef1d08a49bce6b)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F007_zps7f5b2c5b.jpg&hash=9273a7757e297c80fc63fdd4a4108db0e00fcff4)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F008_zpsaac928fc.jpg&hash=b4db8084fcf605367152fe864aa32715056defc1)

I also wanted something to stiffen the bracket along the length of it so I made a small angle brace out of 13 ga CRS.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F010_zpse60bd10d.jpg&hash=5da960f08f966d32a3220a1dd25c13035742a9cc)
A handy PTX tool cleans up the steel after it's been cut on the WJ
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F011_zps530e6ecb.jpg&hash=629f60c3e94c2e6f95e1c903241dfd974b268674)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F012_zps8af31d5b.jpg&hash=edeb91f7c8abf6430e119bb21e73ba24941e514a)
Entered the info in the press/brake:
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F014_zps67f9d77a.jpg&hash=01eb3e5aa24130558903cf589eb2606e01338be7)
Put in some tooling:
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F015_zps90e03d25.jpg&hash=cca36d241f43c22747ee769ed319e6e64fd62a5c)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F016_zps941581ba.jpg&hash=198df82a3a8ddfa4f180534815e2e67cd753a887)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F017_zps0c59abd4.jpg&hash=c3cf3655a9928452e965d2e34d725e43b679002f)
Checked to find out I got lucky the first time
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F018_zps1b3944a6.jpg&hash=e156e978d5bd866c630a6d7a7560e5bdaef4eca8)

I cut another part out for the radius on top & fit the various parts together
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2F019_zps05c23d64.jpg&hash=78bb11a3ddf61286a2e7588e0845e13bbeb65e71)

I went ahead and welded them up & ground them smooth. I'm way better with a grinder than I am with a welder.

Here they are painted & mounted on the bike. The bike is dirty & in desperate need of a bath.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0253_zps0280e5bd.jpg&hash=2a6af3cdc56a01a5342b6b712d4bb31c256edf28)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0254_zps88fa8306.jpg&hash=de14a805069d0ef7f6cd4a4a45ae90ec73e0ede5)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0255_zpscbcf5b6a.jpg&hash=0c5d7fdcf04aeb9d1537cd9c8a40fffe1de49341)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0256_zps3c47211e.jpg&hash=3a82abe52943b87c17e7ec8d4bbbd37fdcac33cf)
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0258_zps1e2981e4.jpg&hash=743369a5583ca6ac966d0b2002317325a969bdb4)

This picture really bugs me. Does a problem show up in the picture?
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0259_zps73b72bb5.jpg&hash=459bf1b55fa2617a1b9b3689d0bfe22881807e44)

Now that I have them on I see a whole lot of things I should have done differently. "Rev B" is in the thought process at the moment.
Title: Re: Adventures in Saddlebags
Post by: CDNRatMan on May 21, 2013, 18:05:50 PM
  Well I think we could go into business here selling brackets and a few other items.....mmmmm.....very nice.
Title: Re: Adventures in Saddlebags
Post by: Drift1 on May 21, 2013, 18:39:02 PM
Boaski,great job on the pinstripes really breaks up the color nicely.Sure Chief will enjoy this post for the mod section,great write up pics as well.Unfortunately for me these are machines I'll never own so following your directions are way beyond my league on this one.Besides if you ever saw me operate the computer that cutter wouldn't stand a chance behind these fingers.....now my dear son Aidan on the other hand.....Hmmmm??????What do you say maybe I can get him one of these tools for Christmas ::)Any back to the mounts.Those bags are sweet,love that little pouch on the bottom.....looks detachable.The only problem I see is they stick to far out from the sides of the rear fender.Wouldn't want them touching but,definately as close as possible without....just mop of course..When they ready available I'm in the market for a set as well.
Title: Re: Adventures in Saddlebags
Post by: Boaski on May 21, 2013, 20:50:12 PM
The pinstripes were done by hand by an older local guy. I told him to do something to break it up & look "old school". I really like what he decided to do. I think he charged me a whopping $150.

The machines are a benefit of where I work. Long story short; we sold our family business to a larger company a few years ago. As part of the purchase agreement I made sure I could still work on my own projects after work. Having a waterjet and a CNC press / brake definitely come in handy at times. On the other hand, by the end of the day I usually don't want to turn around and go back to the shop.

One of our primary products is electrical control panels, boxes and brackets. Since a lot of the stuff is military we have demands for bend and size tolerances of +/-.005". That tends to make a person talk to themselves.

If you ever want to mess with 2D CAD there is a program we use called DraftSight. The best part is it's free.

Back to the bags:

The saddle bags that are on it are ones I got with the bike. Not sure what model or how old they are.

Did anyone notice that the saddle bags are not centered?
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2F2000%2520Drifter%2520800%2FIMG_0259_zps73b72bb5.jpg&hash=459bf1b55fa2617a1b9b3689d0bfe22881807e44)

The bag on the left sits 5/8" farther from the fender than the right one. The bag brackets are identical mirror image right to left. It doesn't look like the seat mounts have been modified. Weird.
Title: Re: Adventures in Saddlebags
Post by: CDNRatMan on May 21, 2013, 22:20:26 PM
thanks for the insight because I was fixing my glasses again......most people will not notice that .....
Title: Re: Adventures in Saddlebags
Post by: DC on May 22, 2013, 06:38:56 AM
Quote from: Boaski on May 21, 2013, 20:50:12 PM
Did anyone notice that the saddle bags are not centered?

The bag on the left sits 5/8" farther from the fender than the right one. The bag brackets are identical mirror image right to left.

Yeh, I did notice that, but in the grand scheme of things, who cares.  The bracket mod, as a whole, looks fantastic and everything is heavy-duty.  You don't get craftsmanship like that anywhere anymore.
Title: Re: Adventures in Saddlebags
Post by: Troll on May 22, 2013, 08:56:43 AM
Ya gotta love modern machine tools...I'd be happy just having access to a lathe and a press again, but this...it's a glimpse of nirvana!
Title: Re: Adventures in Saddlebags
Post by: Gerhardberger on May 22, 2013, 10:03:52 AM
Congratulations for the job done, and for the impressive graphic description.

Yes I also noticed the difference in the distances between the saddlebags. In my bike I have the same problem. One bag is slightly further than the other, but that is just because on one side I attached the saddlebag behind the chassis, and on the other in front of it. As soon as I've `30 min free time, I will fix that small problem.  ;)
Title: Re: Adventures in Saddlebags
Post by: greenbarn on May 22, 2013, 16:25:22 PM
Quote from: Boaski on May 21, 2013, 20:50:12 PM

Did anyone notice that the saddle bags are not centered?

The bag on the left sits 5/8" farther from the fender than the right one. The bag brackets are identical mirror image right to left. It doesn't look like the seat mounts have been modified. Weird.

I noticed, but I'm thinking most people would not notice it sitting in a parking lot, and certainly not going down the road.  The brackets I fabbed were also like that - I had to give them some individual "attention" to get them to come out even, before painting. 

That's a really nice job - do you have the seat and luggage rack part of the project done yet?  I'd love to see the pics on that. 
Title: Re: Adventures in Saddlebags
Post by: Boaski on May 22, 2013, 21:02:49 PM
No more progress on any of the other stuff. Swamped at the shop at the moment. I need some time sitting and staring before make some more parts. The wheels of progress grind exceedingly slow.

I need to make one of my Sunday afternoon rides pass through your neck of the woods.
Title: Re: Adventures in Saddlebags
Post by: 49Reo on May 22, 2013, 22:12:22 PM
Great job, Boaski. Yes. I too noticed the discrepancy in clearance. Who cares. If anyone rags on it, just say "thanks from everybody else.... as long as you are picking on me, you are leaving them alone!" ;D Seriously though, it (all|) looks great together. Nice job.

Regards
Title: Re: Adventures in Saddlebags
Post by: greenbarn on May 23, 2013, 16:22:25 PM
Quote from: Boaski on May 22, 2013, 21:02:49 PM
No more progress on any of the other stuff. Swamped at the shop at the moment. I need some time sitting and staring before make some more parts. The wheels of progress grind exceedingly slow.

I need to make one of my Sunday afternoon rides pass through your neck of the woods.

absolutely you do. 
Title: Re: Adventures in Saddlebags
Post by: LarryInSeattle on May 26, 2013, 12:16:59 PM
Hey... nice job.  They look great. 

I wish you were my neighbor! 

They are not the usual throw over bags that hang uneven like a big portion of the saddlebags out there. 

I don't like the looks of the two up seat either.  As long as I have another bike to give her a ride on, then it won't change over here.
Title: Re: Adventures in Saddlebags
Post by: Boaski on May 31, 2013, 19:46:56 PM
During the time I was working on mounting the saddle bags I had a sudden rush of blood to the brain & realized what kind of hardware I needed. I can't seem to find the proper name for the things. Here's a picture of the same type of doohickey I need on an old snowmobile:
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi116.photobucket.com%2Falbums%2Fo35%2Fboaski%2FBoa%2520Ski%2F1970BoaSkiTrunkLatch_zps2646b681.jpg&hash=6c1cbe1752088d1924e07e91fd1beb4b96b1e297)

I can't even come up with a good name to search for - quarter turn latches?.... Any ideas?
Title: Re: Adventures in Saddlebags
Post by: Troll on May 31, 2013, 20:19:07 PM
  That's what holds the convertible top on an English sports car...that and lift the dot fasteners:  http://www.perfectfit.com/15334/Common--Sense-Fasteners.html
Title: Re: Adventures in Saddlebags
Post by: CDNRatMan on May 31, 2013, 20:47:42 PM
I have a buddy who is an upholster guy and i'll now have to ask him what they are called because we use them on boat covers, snow machine tarps.
Title: Re: Adventures in Saddlebags
Post by: greenbarn on May 31, 2013, 23:01:35 PM
Yeah, a guy used to share our shop years ago and he made boat covers, tonneau covers, and re-upholstered truck seats,  etc.  He had a pot-load of this type of things.  Find an upholstery shop, or boat-cover shop - Marion or somewhere around should have one - and they'll have a bunch of these.  You could probably choose between sizes and types. 

If you're wanting these "common sense" fasteners for leather on the saddlebag, Tandy might have something that would work.
http://www.tandyleatherfactory.com/en-usd/home/department/hardware/bag-clasps-closures/bag-clasps-closures.aspx
Title: Re: Adventures in Saddlebags
Post by: Boaski on June 01, 2013, 06:59:42 AM
Thanks for the info. "Common Sense Fasteners"; wonder why I didn't guess that name....

I did find them on the McMaster site - http://www.mcmaster.com/#common-sense-buttons/=mzwo4c (http://www.mcmaster.com/#common-sense-buttons/=mzwo4c)

The saddlebags I have appear to have the brass female fittings for these fasteners. I should be able to make the next set of mounts so the bags are easily removable.
Title: Re: Adventures in Saddlebags
Post by: Troll on June 01, 2013, 07:03:27 AM
Just goes to prove that common sense isn't as common as it used to be  :o
Title: Re: Adventures in Saddlebags
Post by: greenbarn on June 01, 2013, 10:16:30 AM
Quote from: Boaski on June 01, 2013, 06:59:42 AM

The saddlebags I have appear to have the brass female fittings for these fasteners. I should be able to make the next set of mounts so the bags are easily removable.

So the bags are held onto the bike with these fasteners??   That doesn't seem like a very secure method to me, unless maybe there were a bunch of them on each saddlebag?   


Quote from: Boaski on June 01, 2013, 06:59:42 AM
I did find them on the McMaster site -
BTW, aren't they great?  Sometimes I think their prices are a bit high on some stuff, but usually better than Grainger.   I ordered some air hose crimp-style ferrules, and a plastic oil pitcher from McMaster last week - sent the order in on-line late in the day, I'm thinking 3-5 PM, thinking it would be here in a couple days.  It showed up on the UPS truck THE NEXT MORNING.   Can't beat that...
Title: Re: Adventures in Saddlebags
Post by: Boaski on June 01, 2013, 20:37:36 PM
The bags have 4 slots along the top of each for the "common sense" latches on each unit. I think If I can find some that are made stout enough I should be able to make the saddlebags so they can be removed quickly. Right now I have 1/4" bolts going through the fastener openings.

I probably order from McMaster 2 to 3 times a week. They do a good job covering for my poor planning. Our area is primarily serviced by the Cleveland location. If I order by 5:00 pm I can count on the stuff showing up the next day. I think they have one of the easiest to use websites as well.

BTW Greenbarn, do you do front end alignments?
Title: Re: Adventures in Saddlebags
Post by: greenbarn on June 02, 2013, 08:32:29 AM
Quote from: Boaski on June 01, 2013, 20:37:36 PM

BTW Greenbarn, do you do front end alignments?

yes, $49.99
Title: Re: Adventures in Saddlebags
Post by: Drift1 on June 10, 2013, 21:07:25 PM
Boaski sorry not to get off the subject but can you tell me were I can find them rear dresser bars.Thank you
Title: Re: Adventures in Saddlebags
Post by: Boaski on June 13, 2013, 17:26:02 PM
Quote from: Drift1 on June 10, 2013, 21:07:25 PM
Boaski sorry not to get off the subject but can you tell me were I can find them rear dresser bars.Thank you

They were on the bike when I got it. I'll look through the paperwork to see if there is a receipt.
Title: Re: Adventures in Saddlebags
Post by: Boaski on June 13, 2013, 17:28:02 PM
Quote from: greenbarn on June 02, 2013, 08:32:29 AM
yes, $49.99

I'll get a hold of you & see if I can schedule a Saturday appointment in the next few weeks. I have a '03 Avalanche that I've dumped a lot of money into & it's still "a wanderin".
Title: Re: Adventures in Saddlebags
Post by: DC on June 14, 2013, 07:01:32 AM
Quote from: Boaski on June 13, 2013, 17:28:02 PM
I'll get a hold of you & see if I can schedule a Saturday appointment in the next few weeks. I have a '03 Avalanche that I've dumped a lot of money into & it's still "a wanderin".

I have the same exact truck.  Are you a member of the Chevy Avalanche Fan Club (http://chevyavalanchefanclub.com/) forum?