Vulcan Drifter Riders

DISCUSSIONS => Drifter 1500 only => Topic started by: John Hopkins on January 28, 2013, 07:47:30 AM

Title: Please help Indicators 1500 - Alarm Installation
Post by: John Hopkins on January 28, 2013, 07:47:30 AM
Hi I need a little help..

I am installing an alarm with all the whistles and stops but I need to tap in to the live side of the left and right indicator wires as close to the fusebox as possible..This is a model J...It looks like I am going to have to remove the rear fender but if the wires come out near the fuse box I don't want to strip the fender if I don't have to..

Thanks..

John.
Title: Re: Please help Indicators 1500
Post by: Troll on January 28, 2013, 08:49:46 AM
There is a little black, plastic cover located just ahead of the swing arm pivot, on top of the arm. It's secured with a chrome bolt and a phillips screw. The wiring harness plug for the rear fender lives under there.
Title: Re: Please help Indicators 1500
Post by: John Hopkins on January 28, 2013, 13:36:14 PM
Quote from: Troll on January 28, 2013, 08:49:46 AM
There is a little black, plastic cover located just ahead of the swing arm pivot, on top of the arm. It's secured with a chrome bolt and a phillips screw. The wiring harness plug for the rear fender lives under there.

Thank you That will save me a lot of fumbling around..I will try that tomorrow..

John.
Title: Re: Please help Indicators 1500
Post by: John Hopkins on January 28, 2013, 13:46:07 PM
I coudn't wait, I got it, just behind the left passenger floorboard hinge..Sir I kiss the ground you walk on..

John.
Title: Re: Please help Indicators 1500
Post by: DC on January 29, 2013, 11:23:01 AM
Is the alarm going to actvate the horn, or a separate siren?
Title: Re: Please help Indicators 1500
Post by: CDNRatMan on January 29, 2013, 15:29:33 PM
 ;D  the little man who is dressed in green will run out of the bushes and whack away at you with his shellaly or how ever that stick is spelt.....
Title: Re: Please help Indicators 1500
Post by: chief on January 29, 2013, 16:26:19 PM
I like the banshee alarm a lot better than the wee green folk alarm. I want to put one on my bikes too... every time I get the funds... I see something else I can't live without... but its only been 10 years.

Title: Re: Please help Indicators 1500
Post by: John Hopkins on January 29, 2013, 17:40:05 PM
Quote from: DC on January 29, 2013, 11:23:01 AM
Is the alarm going to actvate the horn, or a separate siren?

125 Db siren

If you remove the key without arming the alarm it says..Please arm the alarm..

If the bike is knocked or moved it says..Step back, this bike is armed..

It has a silent alarm which flashes the indicators and imobilises the bike.

Anti Tamper Hotwire..lights flash siren sounds bike imobilised..

Bike locating..press the button..lights flash and alarm beeps eight times.

Overtake warning..press button...indicators flash alarm beeps for eight seconds.

Anti hijack..button range 100 yards imobilise and alarm..

remote start.

remote engine cut off..

panic button..indicators flash alarm sounds..

If the power is cut off the alarm resets when it comes back on..

And all for £33..under $50.

John.
Title: Re: Please help Indicators 1500
Post by: chief on January 29, 2013, 19:32:42 PM
Whats the brand? I like the remote keychain deal where you can lock it or see that you locked from some distance. And if anyone tampers it pops up on your keychain fob... I have one of those for my truck (viper).
Title: Re: Please help Indicators 1500 - Alarm Installation
Post by: John Hopkins on January 30, 2013, 05:18:35 AM
NCS Cyclone V2 (Talking version)

John.