I am not sure what I have as far as a light bar goes, one of the lights had some water in the housing and need to see if you can just buy the headlight by itself. the bar itself bolts onto the bottom of the steering head with pipe and metal mount that the turn signals bolts to. I will take a shot of the bar itself and load later.
(https://www.vulcandrifterriders.com/forum/proxy.php?request=http%3A%2F%2Fi88.photobucket.com%2Falbums%2Fk192%2Fyellowgizmo99%2F1999Drifter.jpg&hash=92e5358c1cbab91c9bdafa4e709c05888a5ca10a)
I love your bike! You could probably take that headlight apart, dry it and put a bead of silicone caulk around wherever it was leaking and I'd bet it would work again.
I plan on putting HID's on all lights including the fod lights, which is the part I am worried about. The light itself looks like after the ruct was gone that it may not be sealed completely and not sure what will hold up to the heat from the HID's yet so was looking for a replacement just in case. Also if someone knows of a complete headlight set-up let me know, I am thinking of dual headlights to go on front also.