We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by JagLite
- May 09, 2016, 20:44:20 PMThat's disappointing.
For you and them.
I am making custom mounts for my Singh solo saddle for a similar problem.
The mount supplied for the front puts the seat too far back.
It leaves a gap from the tank to the seat that is rather ugly but worse it puts me too far back for comfort.
My arms are stretched out too much, and I am 6'-4".
I compared where my butt is on the stock 2-up seat and the Singh solo and it is several inches difference.
I spent hours trying to make it work using the supplied mount before deciding I was going to have to make my own for the front and the rear springs.
I have a welder so it will only take time, but for someone who expects it to bolt on and work, it may not be okay.
Posted by bambam0099
- May 06, 2016, 10:15:38 AMI ended up returning the seat (in a VERY unconventional method I might add) to Heathers Leathers.
This entire fiasco began at end June 2015 and I eventually had enough.
Worst experience I've ever had...never again...glad it's over.
Great looking product but,,,,,,,,,,,not worth the bull
(and yes, I've retained every email correspondence so there would be no question if this comes up again in the future)
Posted by bambam0099
- February 28, 2016, 20:23:56 PMOk, I was able to put on the seat today. I have to admit, what a pain. I had to take off a side cover so I could get my hand underneath the front of the seat to put on the 2 nuts onto the 2 studs that go thru the metal bracket that is bolted where the stock rubber grommet for stock seat goes. And that was hand tight because I will need to put a washer or 2 under the bracket because the front of the seat presses down on the gas line which, obviously, you can have or you'll crush it when riding. I can't imagine what it would be like if you broke down on the side of the road. There seems to be a larger than expected gap between the front of the seat and the tank (or maybe I'm expecting too much?). I'm going to send a few pics to Heathers Leathers to get their feedback. Hopefully there is an easier way to attach this and to fill in the gap.
Youtube links to the install process:
Posted by bambam0099
- February 20, 2016, 12:32:30 PMQuote from: greenbarn on February 18, 2016, 19:56:45 PMI went and did a test fit. When I put it on the bike as is, there was a very large gap between the front of the seat and tank so I slid the mounting plate forward and put back on. OF COURSE my phone went dead and I couldn't take pics afer readjusting. There was still a gap but it didn't appear anywhere near as bad.Can't wait to see that one on the bike! Wow, 29 weeks... You could have had a kid by now or something....
Heathers Leathers is sending me the front mounting bracket which should be here by end of week so I will remount next weekend and of course, take new pictures.
Posted by greenbarn
- February 18, 2016, 19:56:45 PMCan't wait to see that one on the bike! Wow, 29 weeks... You could have had a kid by now or something.... 
Posted by bambam0099
- February 18, 2016, 19:35:54 PMGot the seat back today but it was missing a front bracket so I contacted Heathers Leathers again.
Here is a picture of the underneath of the seat. In the front, you can see the 2 bare studs where the front bracket should be.
Maybe I'll grab some rags and small pieces of wood to protect the tank and see if the rear of the seat bolts up.
Cripe, it's been 29 weeks since I began this fiasco. I'm hoping to end it soon.
Posted by bambam0099
- February 18, 2016, 08:05:00 AMQuote from: RockinRonny on January 25, 2016, 04:50:58 AMSupposed to be arriving today. If it does, I will try it out either tomorrow or Saturday (the bike is in storage) and get back to you here.......Would love to see BamBams seat installed when it happens and get some feed back as to how it fits ( height).....
Posted by tj
- February 07, 2016, 11:02:56 AMQuote from: bambam0099 on January 14, 2016, 13:47:51 PMYes. I ordered a seat from Heathers Leathers (pic to follow) that I sent back for a little tweaking but, they made a seat pan that they say will fit a 40's (or was it 50's?) Indian. It didn't bolt up to the "normal" hole that the stock triangle bracket bolts to but rather, to the frame.
If you want to know more, contact Wayne at Heather Leathers and tell him Joe Beaton referred you to him. And BTW, they make awesome seats and other products!
That's a great looking seat!
Posted by DC
- February 07, 2016, 00:33:10 AMQuote from: greenbarn on February 07, 2016, 00:00:18 AMI think they are trying to hang on to the past and also save money at the same time. The Drifter is definitely ahead of the new Indians, at least until they start maturing the product line. . . . if they even do.I agree with that... Seems like the Drifter is farther ahead of the new Indian in more ways that one.... They put a clutch cable on there too.....
Posted by greenbarn
- February 07, 2016, 00:00:18 AMQuote from: DC on January 25, 2016, 08:57:14 AMIt's too bad they didn't make the new Indians liquid cooled. What a missed opportunity and a flub! I think the Scout is the only one they went in that direction on.
I agree with that... Seems like the Drifter is farther ahead of the new Indian in more ways that one.... They put a clutch cable on there too.....
Posted by DC
- January 25, 2016, 08:57:14 AMIt's too bad they didn't make the new Indians liquid cooled. What a missed opportunity and a flub! I think the Scout is the only one they went in that direction on.
Posted by RockinRollin
- January 25, 2016, 04:50:58 AMGoing on a well reserved Holiday (says me) so I will leave the seat decision until I get home. Would love to see BamBams seat installed when it happens and get some feed back as to how it fits ( height).
Now that the Indian bags on the way I would like to try and match the Indian desert tan color which the Indian reduced reach seat does but I'm sure the custom seat company's would come close?
Really love the look of the Indian bags.
I get a chuckle when I look at the picture of the Vintage Indian, there's this young fella with an afro in the right side, back ground drooling over the bike. You can read his mind - " Man I would make that bike look so good if I was on it!"
Posted by pcarrell
- January 24, 2016, 21:17:58 PMWOW!!!!
Go-Go Gadget legs and arms!
Posted by CDNRatMan
- January 24, 2016, 14:14:50 PMCan we build one for PC on his Drifter and let him test it........
Posted by greenbarn
- January 24, 2016, 13:52:37 PMI like both of those seats-- The Heather's looks more vintage of course, and like some others I would hate paying that much for the Indian seat...
PC: the electric plug is not for heat--- It's for the air bag system--- new safety feature from Indian? Haven't heard of it? I think if the bike's computer detects a pending crash, the air bag goes off and ejects you above the crash scent- and then the parachute in the Indian accessory biker jacket ($1499) deploys and brings you down safely on your feet....