Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 49Reo
 - August 06, 2015, 15:24:11 PM

Are those beach bars on that ( beautiful!) ride?

Posted by CDNRatMan
 - August 06, 2015, 13:31:38 PM

  Great pictures of a very unique ride, you are awful young in that first picture. But guess island life keeps you young.
Great paint scheme on your bike and well done.
This past winter I added a set of risers I picked up  they would be the first picture I have added below. I kept the stock handlebars. I did turn the bars up a bit more then they were from the factory, that is changed the angle, and in your pictures you have the stock 2" risers, and mine are 4" up and 2" back. Also your bars seem to be rotated down and so they would be lower. This new configuration on mine have made a huge difference in seating posture and for handling.
I did not have to change any cables or wires other then a couple of rerouting and some moment of the guides. Or do away with the guides.

Posted by pcarrell
 - August 06, 2015, 08:45:44 AM

Scootworks Phat Risers II raises the bars 2 1/2" and back 3", and all you have to do is reroute a couple of things, but all stock cables can be used.  http://www.scootworks.com/shop.cgi/page=partskawhandle.htm/SID=1438868537.23095

Posted by mittico68
 - August 06, 2015, 03:36:00 AM

Hi Ansdrifter and welcome aboard.
Maybe this could help ya:
http://www.ebay.com/itm/Kawasaki-Vulcan-800-Classic-Handle-Bar-Riser-Extensions/131571834570?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140602152332%26meid%3De6c856e5994e4f48b0029581f6341cd4%26pid%3D100011%26rk%3D2%26rkt%3D10%26sd%3D131549719004
As you can see, those risers are 2" high and, as far as I know, it shouldn't force you to change cables etc.
BTW, any pics of your beauty? This Forum is waaay hungry for pics! ;)

Posted by ansdrifter
 - August 06, 2015, 02:05:39 AM

Hey hello to all drifter...
i want to rise up my handlebars...i have a kawasaki drifter800 2000 and as you can see from photos my handlebars are very low and ancomfortable.
any suggestions about what i can use in dimensions to avoid change cables,throttle line????

thksss :D :D :D

SMF spam blocked by CleanTalk