We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Elmo Hayride
- November 28, 2014, 14:08:29 PMYes, 56, correct. Please PM me your email and shipping info so I can shoot you an invoice.
Posted by richaud
- November 28, 2014, 11:01:23 AMHi. Ok 56 usd shipped. Ok for me. Just to make shure.. for The longshots right? Is PayPal OK?
Posted by Elmo Hayride
- November 28, 2014, 10:59:06 AMRichaud,
It's $16.28 to Torrance, CA 90503 (not 90530).
Posted by richaud
- November 28, 2014, 03:33:40 AMGot shipping adress i CA 90530 Torrance.
Cheers.
C
Posted by Elmo Hayride
- November 27, 2014, 16:24:34 PMWhere do you live?
Posted by richaud
- November 27, 2014, 09:01:38 AMHow much is shipping? I'm interested.
C
Posted by moosewing3
- November 25, 2014, 19:22:15 PMWith shipping it actually works out cheaper to buy local here, thanks though!
Posted by Elmo Hayride
- November 24, 2014, 21:44:57 PMHow's $40 + shipping.
Posted by moosewing3
- November 24, 2014, 20:41:17 PMHow much you want Elmo?
Posted by Elmo Hayride
- November 24, 2014, 14:17:48 PMmoosewing3, I'll sell you my longshot baffles if you are still interested.
Posted by 49Reo
- November 24, 2014, 10:46:42 AMMoosewing, you can purchase the baffles for Vance and Hines at J&P Cycles; don't see a listing for the Longshots baffles but they have them for the Straightshots which are the same diameter pipes and mufflers as the Longshots. Of you contact V&H themselves they can give you the info you need; they may even sell them separately.
Posted by rawv
- November 24, 2014, 04:33:09 AMI ride a 99 Drifter with Vance and Hines Longshots ... I didn't like the sound I got after removing the baffles so I wraped half the baffle with fiberglass matt and then used tie wire to hold it don't use to much fiberglass or it won't go back into the pipe just acouple of wraps .
Posted by moosewing3
- November 16, 2014, 21:35:06 PMIf anyone who has removed their baffles is interested in selling them let me know, I personally am finding my bike a little too loud without them.
Posted by 49Reo
- November 16, 2014, 20:11:06 PMThe longshots (and I expect most V&H pipes) have a screw holding the baffles in. Remove the screw, pull the baffle, and like Elmo say, plug the hole. It might lean it out a bit due to less restriction.
Posted by Elmo Hayride
- November 16, 2014, 19:17:33 PMI don't know if you will experience anything but improved performance. I took My baffles out of the V&H's on my '99, had them sandblasted, and never put them back. If you do pull them out make sure there are no holes in the end of your pipes facing the fender. I had that situation and quickly put in a couple of long bolts; to stop it from burning my fender and have something in the pipe if anyone wanted to check the depth.