Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by cochise
 - October 02, 2014, 15:06:48 PM

Can't figure out my issue of suddenly having to run with the choke on or it will miss on low end acceleration. No vacuum leaks ( carb cleaner spray and propane) tank clean, all hoses ok., wires and cables ok, I've had the tank and carb off about ten times (can do it all in about 5 min now) I'm thinking the pilot jet circuit has  got something in it. Although I sprayed a can at and into the carb and took out the pilot jet I'm going to soak it in a can of Chem Dip carb cleaner. It will destroy rubber and plastic so I'm trying to get it totally apart. Seen a parts diagram but not instructions how those plastic elbows come off ect. Anybody gone this route?

SMF spam blocked by CleanTalk